资源列表
EXAMPLE
- 此例为STM32F103ZET6的模板，用的时候直接在上面写，就不用再新建工程了。-This example is STM32F103ZET6 template, when used in direct write, there is no longer a new construction.
GEopccode3
- OPC服务器源代码，可以运行和自注册，并可通过标准OPC客户程序读写数据-OPC server source code GE. Can run and self registration, accessible through standard OPC client program to read and write data.
load2
- 人行横道智能控制交通灯源程序加proteus仿真图，自己编写，并且仿真通过-Crosswalk intelligent control of traffic light source program and proteus simulation diagram, write their own, and simulation through
PWM-output
- 基于STM32CortexM3内核PWM波形输出，通过修改程序的时间参数，可以得到不同占空比的波形，如50 ，75 ，100 。-Based on kernel STM32CortexM3 PWM waveform output, by changing the time parameters of the program, can get different duty cycle of the waveform, such as 50 , 75 , 100 .
1.Read-SN
- STM8S系列单片机通过RC522读卡电路读取IC的序列号，库函数版程序。-STM8S series microcontrollers RC522 reader IC circuit reads the serial number, the library version of the program.
AS3911SHEJIJITIAOSHISHOUCHE
- as3911 yingjianshejishouche
STM32F207-schematic
- STM32F207开发板（基本型）原理图,可用于设计开发板，对电路设计者可参考使用-STM32F207 development board (basic) schematics, can be used to design and development board, the circuit designer can refer to the use.
STM32F207-AD9
- STM32F207开发板（基本型）V1.0 AD9封装库，对电路设计者有用，是protel用的。-STM32F207 development board (basic) V1.0 AD9 package library, useful for circuit designers, is protel use.
pressure-control
- 将施加于压力传感器金属弹性元件表面的压力，通过字符型液晶显示屏显示的其数值，并随力的大小而变化，且显示压力的量程可以调节。压力超过量程时，显示屏显示过高还是过低，蜂鸣器报警，电机运行（压力传感器用滑动变阻器代替）-The pressure applied to the pressure sensor element elastic metal surface by character LCD display of its value, and with the magnitude of the
slac503d
- MSP430F532x_Code_Examples source code
slac503e
- MSP430F532x_Code_Examples latest source code
96340_bootloader_uart_async-e
- Fujitsu bm90 series bootloader program