资源列表
DS18B20
- 实现温度传感器的相关程序的实现，用于STM32单片机-Achieved temperature sensor procedures for STM32 Microcontroller
1.77-tft-stm32
- 1.77 tft显示屏 stm32使用代码-1.77 stm code
stm32USB
- STM32通过USB外设将SD卡模拟成U盘，可以直接进行读取数据-STM32 via USB peripherals will be simulated SD card into USB flash drive, data can be read directly
blinky_example
- nrf51 arm开发闪灯实例程序,用于闪灯，内部包含ad采样程序部分和时间控制，部分功能被注释掉了，需注意调整开发板引脚。-The example for nrf51 building about Led s blinking.
arduino-1.0.1-windows
- 已经定制好的对于SANGUINOLOLU的调试编译，先导文件已经在里面了，还有对MEILZ的支持-Custom has been good for debugging compiled SANGUINOLOLU the pilot files already there, as well as support for the MEILZ
Marlin-for-STM32-special
- 用C++写的固件，3D打印中最广泛应用的固件，此为32位定制版本，是经过优化的，有中英文切换和支持定制-With C++ write firmware, 3D printing is the most widely used firmware, this is the 32 customized version is optimized with English switch and supports custom
bed
- WINDOWS/android QT5 界面开发的一个工程源码。 实现功能：界面+socket通信 设计目的：手机与单片机（包含wifi模块）交互通信-no english
vido
- 根据驱动程序，用QT编写控制摄像头的应用程序。-According to the driver, with the QT write control camera application.
QTGPSApp
- 在ARM平台下运行的GPS的定位程序，包括串口通信等。-In the ARM platform running on GPS positioning procedures, including serial communication, etc.
MP3
- 可以在ARM上运行的，用QT编写的音乐播放器。-You can run on ARM, written with QT music player
zstack
- 这里附上一个ZigBeeCC2530协议栈，在文件的内部用户自己开发运用了用几个我自己开发点对点通信内容。-Here we attach a ZigBee CC2530 protocol stack, the internal users to develop their own files with the use of a few of my own development point to point communications.
GPIO
- 79E81 source code General Purpose Input output pins interface