资源列表
shumaguanxianshi
- 该程序代码实现了用单片机使数码管流动显示的功能。给学习者直观的感受,有助于学习单片机。-Digital tube display
LED-simulation-of-traffic-lights
- 东西向绿灯亮若干秒,黄灯闪烁5次后红灯亮, 红灯亮后,南北向由红灯变为绿灯,若干秒后南北向黄灯闪烁5此后变红灯,东西向变绿灯,如此重复。-East-west green light for several seconds after the yellow light flashes 5 times the red light, red light, from north to south by the red light into green light, after several secon
remot
- 红外遥控电动机,采用EMP447单片机,分接受信号和输出控制部分-infrared remote control motor, using EMP447 microcontroller, and the signal-to accept output control segment
gstconv.c.tar
- gstreamer conversion example
Speed-Monitor
- 脉冲宽度测电机转速,用51单片机实现并且在5X7点阵上显示 -Pulse width motor speed MCU with 51 dot matrix display and in 5X7
buttonworld
- minigui控件编程,用来改变按钮显示字体的例子。
SHANGUANGDENG
- EM78P153的源程序,P5.1和P5.2接上LED,按键(P6.0)就可以使LED交替闪烁,同时闪三下,停一秒,有闪光灯的效果哦!
key-pad-interfacing-to-8051
- key pad interfacing to 8051
CAT24WC.rar
- 文件名:CAT24WC02.C * 功能:使用LPC2200模拟EEPROM器件CAT24WC02。LPC2200具有硬件I2C接口,使用其从方式进行 * I2C器件模拟,本例使用了256字节的RAM作为存储单元。 * 说明:将跳线器JP5断开,然后与主机连接(连接信号为P0.3、P0.2、GND,要接总线上拉电阻)。
TMS320LF2407_PWM_motor
- TMS320LF2407 PWM电机控制实验源代码-TMS320LF2407 PWM motor control experiment source code
lcd
- 基于STC89C58RD+液晶多级菜单源代码
abc
- 温度显示,现实的温度能精确到小数点后一位,温度范围在-55度到128度-Temperature display, the temperature can be accurate to one decimal place, the temperature in the range of- 55 to 128 degrees