资源列表
SoftKeyBordTest
- QT实现了点击任一一个lineEdit 就会弹出软键盘，然后利用软键盘王lineEdit中输入信息，再次点击第二个lineEdit的时候，会自动转换到第二个，同时软键盘不会消失。-Achieved eleven lineEdit click on any soft keyboard pops up, then use the soft keyboard to enter the king lineEdit information, click again when the second line
ex_aduio
- 基于STM32103+wm8978+mp3格式的软件解码+WAV文件解析的音频播放 站长你就让我过了吧：）-Based STM32103+ wm8978+ mp3 format file parsing software decoding+ WAV audio player owners have the right you let me:)
my
- s3c2440的裸板程序，基于KEIL4的工程文件，内容有串口驱动，LED灯驱动，蜂鸣器驱动，中断程序，拷贝程序到内存的代码，MMU映射代码。大部分用arm汇编实现-S3C2440-UART Driver、BEEP Driver、LED Light Driver、ISR program、MMU program
PROTEUSElectronic-balance
- PROTEUS仿真 实用电子秤程序 51 单片机-Electronic balance PROTEUS
EXAMPLE4.6
- PIC16887A单片机通过拨码盘SW1选择AD通道，3位拨号开关DSW1选择AD结果对齐方式和参考电压（Vref+）与（Vref－），AD结果在C口和D口上的LED直接显示，如果有错误，在RB7的LED显示，并在C口上显示相应的错误信息。-PIC16887A MCU by dialing code disc SW1 select AD channel, three-dial switch DSW1 select AD results of alignment and the reference
EXAMPLE4.5
- PIC16887A单片机以TMR2的前后分频和PR2的设定，延时10ms。通过RB0输出脉冲，每隔10ms让LED闪亮，采用中断方式。-PIC16887A the microcontroller TMR2 and PR2 frequency before and after the set delay 10ms. RB0 output pulse through every 10ms to LED flashes, the use of interrupt.
Q_SYS_V2_0_Release
- 一种在cortex上跑的GUI设计,可以跑MP3，查看fat文档，看jpeg图片等。-GUI for cortex
tlc549andC51
- Ａ／Ｄ转换ＴＬＣ５４９与５１单片机，模数转换的程序-A/D converter TLC549 and 51 MCU, analog to digital conversion process
nRf905a-C51
- nrf905与51单片机构成的应用电路及程序 资料包括 nRF905中文手册.PDF(1.03M) nrf905en.pdf(442.02K) nRF905_rev1_4.pdf(514.57K) nRF905DevBoard.rar(3.94M) PCB8.rar(183.87K) NewMsg-RF905.pdf(642.65K) NewMsg-RFC30A.pdf(361.1K) NewMsg-RFC30F.pdf(300.05K) nRF90
state_machine
- 在mega16上写一个状态机代码，使得两个二极管同时按照各自方波信号闪亮-In mega16 write a state machine code, making the two diodes at the same time the square wave signal in accordance with their shiny
L298(ATmega16)
- L298电机驱动程序(ATmega16带电路原理图-L298 Motor Driver (ATmega16 with circuit diagram
LPC1114_24C02
- nxp lpc1114的IIC的读写程序，已经调试成功，利用keil编译，flashmagic烧写程序-nxp lpc1114 of the IIC' s literacy program has been successful debugging using keil compiler, flashmagic programming procedures