红外解码的方法 NEC格式 tc9012 1、9Ms的高电平启动头，然后是4.5Ms的低电平，如果2.25Ms时就有高电平，是持续信号，不处理 2、然后以一个高电平和一个低电平为1Bit，高电平时间是0.5625Ms=562us， 高低电平时间比为1:1时是Bit1，比为1:3时是Bit0 3、Timer1中断执行100us采样周期，9Ms＝90，4.5Ms=45，高电平＝5，低电平最多15 4、共读入4Byte共24bit，第1、2Byte是CustomCode码和其反码，第3、4Byte是DataCode和其反码 5、CustomCode正确和DataCode效验正确的话，执行 6、红外接收器输出是反相的
,NEC Infrared format decoding method of the high tc9012 1,9 Ms head start, followed by the low 4.5Ms, if there is high when 2.25Ms, is a continuous signal, do not deal with 2, and then to a high-power low for a peaceful 1Bit, high time 0.5625Ms = 562us, high-low ratio of 1:1 when the time is Bit1, when the ratio of 1:3 is Bit0 3, Timer1 interrupt the implementation of 100us sampling period, 9Ms = 90,4.5 Ms = 45, high = 5, low-level up to 15 4, were read into 4Byte were 24bit, the first is the 1,2 Byte code and its anti-CustomCode code, the first is the 3,4 Byte Code DataCode and its anti-5 , CustomCode correct and well-tested DataCode correct, the implementation of 6, the infrared receiver is the output of the RP