搜索资源列表
DataRet
- 使用串口UART0接收上位机发送的数据，当接收到8个连续数据后，将接收计数值加一后输 出LED1--LED8显示，并将数据原封不动地发送回上位机。-PC serial port UART0 to receive data sent when receiving eight consecutive data, will receive the following output plus one count LED1- LED8 shows the data intact and sent ba
keilc51_manual
- 单片机与上位机PC的通信程序设计方法： ⑴串口初始化：波特率定为4800 ⑵串口接收数据：串口初始化后处于数据接收状态，当有数据到达串口时，串口将数据接收保存在寄存器中暂存 ⑶串口发送数据：等数据接收完成后，将寄存器中暂存的数据通过串口发送给该数据的来源地。-PC-MCU and host computer communication program design: ⑴ serial port initialization: the baud rate as 4800 ⑵ serial rece
shoufa
- 串口通信，单片机将接收来的数据先存储起来，然后通过串口发送给计算机，实现单片机与计算机的通信-hjdjskljeljlkdgjlksadjfl ajfelkjlkfjdkljsdfsefsdafasdfewa
WindowsFormsApplication2
- 串口通信，一个串口发送，发送内容通过textbox写入，另外一个串口接收，并且写入textbox中，并且检测到回车时停止接收-Serial communication, a serial port and send the content through the textbox to write, another serial port to receive and write in the textbox and when detected carriage stop receiving
vbmscomm
- 个MSComm控件的收发程序，能够同时完成串口发送和接收功能--A MSComm transceiver control program, to simultaneously send and receive serial port function-
MCBSP
- 研究McBSP 串口的操作，包括串口的初始化和发送中断服务程序的编写。使用一套DES5410APP-U 系统。使用短路子将J6 的 DR2（5 脚）和DX2（7 脚）短路，将数据发送端与数据接收端相连。从串口发送一个正弦信号（该正弦数据由‘VC5410 的ROM 提供），然后在从串口接收该正弦信号，并使用CCS 的图形工具观察结果。-McBSP serial port of the operation, including the serial port initialization and
51
- 两片51单片机，通过串口中断通信，发送程序，接收程序-2 51, interruption of communications through the serial port, sending program, to receive program
msc1210_AD_input
- 这个程序为msc1210Y5的AD采样程序，采用串口中断接收上位机命令进行转化，并把转化结果发送回上位机显示。程序已经过调试和校正，精度可以达到0.2mV。输入信号范围是-10V-10V，通过运放转化为0.5-4.5输入差分同相端，差分反相端为2.5V基准电压。-This procedure msc1210Y5 the AD sampling procedure for the PC serial port receiver interrupt command transformation, a
hongwaishoufa
- DP_51PRO实验仪红外收发实验。使用串口发送数据经调制后从红外管输出，并通过红外接收模块把接收到的数据返回串口接收端，通过判断接收到的数据来控制LED灯点亮。-DP_51PRO experimental instrument experimental infrared transceiver. Using the serial port to send data via modulated infrared control from the output, and IR receiver m
shuangjitongxin
- 这是一个双击通信方针图，里面有串口接收程序，也有串口发送程序，你只需要把程序分别写入两个单片机就可以了-ZHESHI YI GE DANPIANJI SHUANGJI TONGXIN FANGZHEN TU
serial_read_write
- Linux串口编程接收跟发送的实例，适合初学者-Linux receiver with serial programming examples sent for beginners
Ultra-transimit
- 主要完成接收超声波的程序，采用计时器对超声波的高电平进行计时，最后转换成距离，显示1602上，并通过串口发送-Completed for receiving ultrasound procedures, using the timer on the ultrasonic time high for the last into the distance on the display 1602, and sent through the serial port
CeChat
- 串口通信程序CeChat，实现了通过串口发送与接收信息的功能，类似于一个点对点的聊天工具-Serial Communication Program CeChat, achieved through the serial port to send and receive information function, similar to a point in the chat tool
STM32F-DMA
- * 本文件实现串口发送功能（通过重构putchar函数，调用printf；或者USART_SendData() * 这里是一个用串口实现大量数据传输的例子，使用了DMA模块进行内存到USART的传输 每当USART的发送缓冲区空时，USART模块产生一个DMA事件， 此时DMA模块响应该事件，自动从预先定义好的发送缓冲区中拿出下一个字节送给USART 整个过程无需用户程序干预，用户只需启动DMA传输传输即可 在仿真器调试时，可以在数据传输过程中暂停运行，此时DMA模块并没有停
SCommTest
- 能够接收串口发送过来的信息，并同时向串口发送命令！-Able to receive serial port to send over the information and also send commands to the serial port!
C8051Study
- 利用C8051F020片内AD对心音信号（截止频率600Hz）进行采样（采样频率4096Hz），并通过串口发送。上位机接收程序见本人上传的Matlab程序。-Using AD within C8051F020 sampling of the heart sound signal.Heart sound cut-off frequency is 600Hz.AD sampling frequency is 4096Hz.The receiving program on PC information
UART
- VHDL语言写的串口发送、接收程序，根据晶振和相应的波特率修改分频器就可以实现！-Written in VHDL serial send, receive, process, according to crystal and the corresponding baud rate divider changes can be achieved!
comm_tool
- 可以向串口发送数据，或从指定串口接收数据。数据可以是字符串或十六进制数据。-Can send data to the serial port, or receive data from the specified serial port. Data can be strings or hexadecimal data.
uatr_design_vb
- 一个串口收发器的源代码，包括串口发送和串口接收，并在窗体上显示出发送和接收的字节数-uart_design
UART_Thread
- 本例程主要演示了如何实现串口参数的设置，串口数据的发送，线程方式的串口数据接收。-This routine demonstrates how to implement the main serial port parameters are set, serial data transmission, mode of receiving data from serial thread.