搜索资源列表
Sig_SW
- 本程序基于s3c2440的IO口电平状态检测驱动，适用于开关量信号检测电路。程序实现：检测当前IO口状态并通过串口打印。-This procedure applies to the switch signal detection circuit based on the the s3c2440 IO port level of state detection driver,. Program: detection of IO port status and print through the s
sig_AIN
- 本程序为基于s3c2440的两路模拟信号检测电路的裸机驱动。程序检测出A/D转换后的模拟量并进行了电压换算。-This program is based the s3c2440 two-channel analog signal detection circuit of the bare metal drive. Procedures to detect the A/D converter analog voltage conversion.
driver
- 基于linux的isp驱动程序，实现i2c接口的isp的配置工作，也可用于通用i2c驱动程序的指导-it is based on linux,and it is a driver for isp,used for configuration of image signal processor.also can be used for common i2c driver.
IO-mode
- Linux驱动-IO方式的介绍 1 阻塞 I/O 2 非阻塞 I/O 3 多路转换 I/O 4 信号驱动 I/O--IO mode Linux driver introduces a blocking I/O 2 non-blocking I/O 3 multi-channel conversion I/O signal-driven I/O
canbus
- CAN总线驱动。使用的can芯片是MCP2510 使用的是标准帧，模拟SPI时钟信号，能够实现数据的发送，接收。-CAN bus driver. USing MCP2510 chip, and the standard frame, the simulation SPI clock signal, can realize data to send, receive.
dipinxinhaofashengqi
- 基于单片机的多波形可调频率低频信号发生器-Adjustable frequency low frequency signal generator based on single-chip multi-waveform
8977771cc109gps
- GPS信号模拟器源代码，串口读取GPS报文，解析，显示GPS信号点，很有用的-GPS signal simulator source code, the serial port to read GPS packets, analyze, and display the GPS signal point, very useful
rc2
- 采集声音信号并进行错位乘加求时延，进行处理来估计角度-Collecting acoustic signal and delay seeking dislocation multiply
lpl_stepper
- linux下基于S3C2440开发的步进电机驱动，一根信号线控制HB202M细分器即可实现步进电机速度和方向的控制-linux based S3C2440 development of stepper motor drive, a signal line control HB202M subdivision stepper motor controller can achieve the control of speed and direction
baoluopufenxi
- 可以很好地分析信号的包络谱，效果非常的明显，并且已经在matlab上成功运行-Is a good way to analysis the spectral envelope of signal, effect is very obvious, and it has been successfully run in matlab
m
- 移位寄存器实现为随机信号，2011年E题的一部分，可以用，串行输出-Shift register is implemented as a random signal
gpio_5g
- atheros驱动编程，其中有wifi9344模块驱动信号发送，中国-atheros-driven programming, which has wifi9344 module drive signal to send, China
suanfayanshi
- 算法界面示例及实测汽轮机振动信号，可用于可曾设计-Interface Example algorithms and experimental turbine vibration signal
arm
- 一个关于arm linux的语音信号处理的毕业论文，详细的讲解了各方面的知识。-A thesis arm linux on voice signal processing, a detailed explanation of all aspects of knowledge.
sFFT-1.0-2.0.tar
- 稀疏傅里叶变换算法利用了数字信号处理，特别是高斯和多尔夫-切比雪夫滤波器的技术。与传统的解决方法不同，对于这个问题我们的算法是不迭代的。也就是说，它用一种类似绘制/流式算法的方式“一次”识别并估计k个最大系数，而并非估计“大”系数以及在提示下相减、递归。-Sparse Fast Fourier Transform (SFFT) is a class of sub-linear time algorithms for computing the discrete Fourier transfo
warehose
- linux下的仓库物联网系统 linux下的仓库物联网系统 linux下的仓库物联网系统 -#include<stdio.h> #include<sys/types.h> #include<sys/ipc.h> #include<sys/msg.h> #include<stdlib.h> #include<unistd.h> #include<string.h> #include<
Object
- C++ 实现QT的signal/slots功能-C++ achieve the QT signal/slots function
adc
- 该ADC模块总共有8个通道可以进行模拟信号的输入，分别是AIN0、AIN1、AIN2、AIN3、YM、YP、XM、XP。那么ADC是怎么实现模拟信号到数字信号的转换呢？首先模拟信号从任一通道输入，然后设定寄存器中预分频器的值来确定AD转换器频率，最后ADC将模拟信号转换为数字信号保存到ADC数据寄存器0中(ADCDAT0)，然ADCDAT0中的数据可以通过中断或查询的方式来访问。开发板通过一个10K的电位器(可变电阻)来产生电压模拟信号，然后通过第一个通道(即：AIN0)将模拟信号输ADC。-T
UNIX-process-communication
- 进程通信的实现 分为三个基本文件，进程间信号传递、共享内存、消息机制、PV操作-Realization process communication is divided into three basic signal transmission between files, processes, shared memory, message mechanism, PV operation
ch12-CAN
- This is a package of CAN based on J1939 in signal way communication ,hope you consult