搜索资源列表
minibuttonsandled
- 关于led流水灯与按键结合的程序，四个按键控制led流水灯-Led lights and buttons on the water of the combination of the program, four key water control led lights
pm
- 不同方式2410开发板上led的4个灯的亮法-2410 development board in different ways the four lights led light method
Adder
- 本程序为C程序，用于实现minigui控制灯，软件平台为red hat，硬件平台为s3c2410.-Procedures for the C program used to implement minigui control lights, software platform for the red hat, hardware platform for s3c2410.
leds
- 三星s3c2440 中 arm 实验， c实现 led灯点亮-arm experiment, and c to achieve led lamp lights up
s5pc100
- 利用平台设备机制，对s5pc100实现按键对Led灯的控制，按下点亮，松开熄灭-Use platform equipment mechanism to realize s5pc100 buttons on the control of Led lights, press the light, loosen put out
led_and_button-lg
- 同时测试led灯与按键驱动程序的测试程序，基于mini2440开发板的！-Test led lights and the key driver test program, mini2440 development board!
leds-gpio
- 控制led灯的驱动程序，也就是流水灯，程序中有4个led灯，依次按照先后顺序亮与灭-Control driver led lights, light water, 4 led lights in the program, followed in accordance with the sequence of bright and off
ARM-LED
- 点亮熄灭一个LED灯，点亮熄灭所有的LED灯-Light turns off an LED light turns off all the LED lights
linux2.4-driver
- 用于新手熟悉嵌入式Linux设备驱动开发方法，驱动LED灯，七段数码管，和按键的代码-For the novice familiar with the embedded Linux device driver development, code-driven LED lights, seven segment LED, and buttons
light
- 基于linux retHad gec2440(ARM9)上开发的灯驱动，在gec2440(ARM9)板上实现点灯，关灯的功能。-Developed based on linux retHad gec2440 (ARM9) lamp driver in gec2440 (ARM9) board lighting, turn off the lights.
01led.tar
- s3c6410 开发板LED灯的裸板驱动-bare board driver s3c6410 development board LED lights
k10
- k10基本驱动源码点亮流水灯0,,1，4，5-k10 driver source light water lights
eduk4-key
- /** *summary：本驱动目的为按键控制LED灯的状态 *descr iption：Edkit-VI试验箱中有4个LED灯和2个按键 * 我们用按键1来循环选择你要控制的LED * 按键2来控制LED的状态 * 按键2的操作将在按键1选择的LED上执行 * 初始状态下选择的LED为亮 * 当你按下按键2后选择的LED变为闪烁状态 * 再按一下后选择的LED变为熄灭状态 *author： * * */ /-/ The
led_analog_traffic_light
- /** *本程序目的为控制LED灯模拟红绿灯 * 具体：Edkit-8试验箱中可以介入4个LED灯，但我们只用其中的3只 * 规定第1只表示红灯，每次亮20秒 * 规定第2只表示黄灯，每次亮5秒 * 规定第3只表示绿灯，每次亮20秒 *开始时红灯先亮，然后黄灯、绿灯依次亮。循环反复 *每次灯切换时会有3秒的闪烁时间 * * *gcc -o led_analog_traffic_light led_analog_traffic_light
csu_led
- LINUX 下对LED灯的控制的驱动程序-LINUX drivers under the control of the LED lights
s5pc100_led
- s5pc100开发板LED灯的驱动，包括调试程序，Makefile。在2.6.35内核测试成功。-LED lights drive s5pc100 development board, including debugging, Makefile. Tested successfully in the 2.6.35 kernel.
4_key15_simple
- 这是一个键盘驱动，是在ARM上实现的，通过按键控制LED灯-This is a keyboard driver on ARM keys to control LED lights
316
- 基于摄像头的智能小车控制源代码 值得学习 自动循迹 自动蔽障 识别红绿灯-Camera-based Intelligent Vehicle Control source code worth learning automatic tracking automatically unblinded identification lights
gfds(2)
- 针对HC_SR501驱动的编程，主要是对LED灯的控制-For HC_SR501 driven programming, mainly for control of LED lights
17-platfrom_key
- FS_S5pc100按键驱动,基于platform的，在按键的同时还可以控制led灯得亮灭-FS_S5pc100 key driver based platform, and the keys at the same time you can also control led lights too bright off