搜索资源列表
mouse_ucos
- 可以加载到嵌入式系统终端的鼠标驱动程序，实现了鼠标初始化，鼠标数据读写及复位等功能。-can be loaded to end embedded systems mouse drivers, achieved a mouse initialization, reading and writing data on the mouse and reset functions.
vga
- 可以加载到嵌入式系统VGA显示驱动程序，实现了VGA初始化及显示驱动等功能。-can be loaded into embedded systems VGA display drivers, the realization of the Initialization and VGA display driver functions.
lcdmodu
- linux下基于EP7312的ADS7843显示屏驱动程序，-linux based EP7312 the ADS7843 display drivers,
adcmodu
- Linux下基于EP7312平台，采用ADC0809进行模数转换的驱动程序-EP7312 Linux-based platform using ADC0809 for analog-digital conversion of drivers
dacmodu
- Linux下基于EP7312，针对DAC0830芯片进行数模转换的驱动程序-Linux-based EP7312 against DAC0830 chips for analog conversion drivers
touchpad
- 老外写的触摸屏驱动程序，使用的是常见的7843芯片，平台是VZ328,可移植到多种嵌入式系统中，非常具有参考价值。-foreigner to write on the touch screen drivers, it is common to use the chip in 7843, the platform is the VZ328, transplanted to a wide range of embedded systems, have great reference value.
LCDDIVER_44b0
- ARM7的LCD驱动程序，在支持新了LCD时，更改LCD.H中的LCD_TYPE就可。-ARM7 LCD drivers, in support of a new LCD, the changes LCD.H LCD_TYPE can.
ch452
- CH452按键和显示板驱动程序,采用级联方式,模拟SPI口一次发送24位数据.每级120个灯和120个按键.采用查表换算.-CH452 keys and display drivers, concatenation, a simulation of SPI I sent 24 data. Each level 120 lights and 120 keys. Using Lookup conversion.
lpc213X_C_application
- 菲利普公司生产的ARM芯片LPC213X系列的所有驱动程序，C语言，用ADS开发,非常全。-Philips ARM chip production LPC213X series of all drivers, C language, with the development of ADS, very full.
ARM-CAN
- lpc2294下can总线驱动和串口通信-lpc2294 can bus drivers and serial communication
ads7846
- 基于linux操作系统的触摸屏驱动程序，为ads7843驱动程序-based on the Linux operating system Touchscreen drivers, drivers for ads7843
CS8900_10M
- 为At91rm9200制作的cs8900驱动-At91rm9200 production for the cs8900 Drivers
ETR100_design
- 关于ETR100的设计，包括驱动和关键程序，基于成都英创公司的netbox进行开发。-Muti on the design, including the drivers and key procedures, Based on the Chengdu-British Company for the development of the netbox.
lpc213x-nRf905
- 射频芯片nRF905例程，用LPC2132驱动-RF chip nRF905 routines, and LPC2132 Drivers
PIC_Hi-Tech_C_Mike_Pearces_I2C_routines
- A complete set of bit banged, software driven I2C routines I created for any PIC device - and they work!! These functions are single master only functions, and are ideal for communicating with things like EEPROMs, LCD Drivers, ADC Converters etc
IICMaster
- 12Mhz标准51的100KHz IIC总线主器件模拟方式驱动程序。 本驱动程序即可以在没有Small RTOS的情况下使用。此时，要使用本驱动程序只需要配置IIC总线使用的IO口。在驱动程序的主文件iic_master.c仅包含一个文件config.h。用户需要的是在这个文件中设置IIC总线使用的IO口SDA和SCL。如果用户单独使用iic_master.c，还要在config.h包含iic_master.h文件和其它必须的文件如reg51等；并定义宏TRUE、FALSE和与编译器无关的
ARM7modem
- LPC2000 系列AMR7 微控制器的UART1 具有MODEM 接口功能通过RS232 电平转 换即可与MODEM 连接进行MODEM 通讯控制操作 用LPC2000 系列AMR7 微控制器的UART1 驱动MODEM 驱动程序使用 了AT 命令集的命令进行控制操作所以驱动的MODEM 要支持AT 命令集-LPC2000 series AMR7 UART1 micro-controller interface is functional through MODEM RS232 l
STM8S-peripheral-drivers
- STM8S 外设驱动 ADC BEEP CLK_Modify EEPROM TIM2(16位) TIM4(8位) wdg-STM8S peripheral drivers ADC BEEP CLK_Modify EEPROM TIM2 (16 位) TIM4 (8 位) wdg
C++ port of mini2440 s SdHc drivers
- C++ port of mini2440 s SdHc drivers,alpha version 0.31
drivers
- 附件是 KXTJ2 的驅動軟件 (含 KFA程序)，請注意driver 部分有分為 MTK和其他平台用！-Attached is KXTJ2 drivers (including KFA program), please note that part of a driver into MTK and other platforms use!