资源列表
Fire-Alarm
- 基于C8051单片机的光电火灾报警器。文件为AltiumDesigner下的完整工程项目。-The C8051 MCU based on the photoelectric fire alarm. The file for the integrity of the project under the AltiumDesigner.
GPS
- 基于单片机的GPS显示程序 所用LCD为1602 源程序-Microcontroller-based GPS 1602 program
STM8-IR
- 基于STM8单片机的红外遥控按键解码，采用nec编码协议，PC838接收头-STM8 IR
DHT11-89C52-LCD1602
- DHT11 89C52 LCD1602 温湿度检测c语言程序-DHT11 89C52 LCD1602 Temperature and humidity detection of C language
key
- c语言的eeprom的按键读写的程序 掉电不丢失-the key c language EEPROM read and write procedures after power failure
STM32
- 基于STM32的机械指南针，可以通过按键对日期、时间进行修改-Based on the the STM32 mechanical compass, can be key to modify the date, time
STM32F10x_StdPeriph_Examples_V3.3.0
- stm32f107以太网，串口转以太网，本资料仅供参考。如引起系统故障，本人概不负责-Ethernet stm32f107, serial to Ethernet, the information for reference only. I take no responsibility for the cause of the system failure,
WENKONG
- 用51单片机设计了一个温控系统，并有电路图及相关文档以及功能描述-51 microcontroller with a temperature control system, and the circuit diagram and related documents, as well as the functional descr iption
lcd
- 用到段码液晶屏，一般是用专用驱动芯片如：HT1621等，考虑到，成本、功耗，决定用单片机直接驱动。液晶屏手册建议用1/3偏压，求简单用1/2偏压，实际搭了个实验板试了一下，效果还是不错的。实际可将分压电阻R2-29加大到1M，和用CPU的一个脚来驱动（可关断），进一步减小功耗，现贴出原理图、程序、照片，供有用者参考。 -Used Segment LCD, special driver chip, such as: HT1621, taking into account cost, power
LED
- 熟悉了解STM32GPIO的操作和库函数的使用,低8位跑马 高8位跑马.-Familiar with the STM32GPIO the operation and use of library functions, low 8 8 Happy Happy high.
Zstack-HMC5883L
- 基于zstack协议栈的HMC5883L传感器通信代码，协调器建立网路后终端自动加入，将传感器数据发送给协调器，协调器通过串口将数据传输给PC。 使用IAR编程环境，文件夹内已附带协议栈，打开project-zstack-Samples-CC2530-HMC5883-CC2350DB下的TestC.eww可直接运行-HMC5883L sensor communication based on zstack protocol stack code, the coordinator automa
PIC16F1824
- PIC16F1824的A/D、D/A转换、串行通信、看门狗以及参数存储设计-PIC16F1824 A/D, D/A conversion, serial communication, watchdog and parameter storage design