资源列表
TM1产生SPWMTIM2同步信号
- 输出正弦和方波交替的波形，信号通过外部中断同步(Output sine and square wave alternated waveform, signal through external interrupt synchronization)
单片机基础实验源代码
- 测试CC2530，完成基础的功能测试，包括I/O口，串口，无线(Test CC2530, complete the basic functional test, including I/O port, serial port, wireless)
实验20 点对点通讯实验－无线电灯控制
- 点对点通讯实验，不加协议栈，用于基础学习2530的无线通讯功能(Point to point communication experiment, without protocol stack)
8 UART
- 基础串口通讯小程序，可在此基础上修改，完成串口配置和终端接收，发送等功能(Based on serial communication small program, can be modified on this basis, complete the serial port configuration and terminal reception, sending and other functions.)
以太网STM32F107_ETH_LwIP_V1.0.0
- 测试stm32f107以太网连接功能，实现对于数据通讯的连接测试(Test stm32f107 Ethernet connection function to achieve connection test for data communication.)
UCOS+LWip移植资料文件
- 基于stm32f系列的关于ucosii和lwip的移植文件，操作系统和简易的网络系统(Based on STM32F series of porting files for uCOSII and LwIP, operation system and simple network system.)
DS-TM57PE10_SV12
- 十速TM57PE10 8位单片机规格书,(Tenx TM57PE10 8 bit MCU specification)
HT66Fxx_IIC
- HT66Fxx 的硬件IIC从机代码，根据datasheet编写，可用(HT66Fxx's hardware IIC from the machine code)
stm32f_nand_flash_bch
- 使用STM32F407开发的 NAND FLASH接口部分，实现了NAND FLASH的基础命令操作，使用STM32自带的BCH，可以实现完整的纠错功能，可以用来学习NAND FLASH 或者调试；由兴趣的朋友可以看看(Using the NAND FLASH interface part developed by STM32F407, the basic command operation of NAND FLASH is realized, and BCH with STM32 is use
如何準備TOEIC
- CCS license file for all version
SMT32F_QSPI_NAND
- 使用STM32F446实现的QSPI接口，增加了4线 SPI NAND的驱动程序，实测可以多种SPI NAND 实现基础操作，可以用来调试QSPI接口，或者SPI NAND；有兴趣的朋友可以看看(Using the QSPI interface implemented by STM32F446, the driver program of the 4-wire SPI NAND is added, which can be used to debug the QSPI interface, or
SPI_FLASH
- tms320c9748 spiflash 读写(c9748 spiflash read and write)