资源列表
M64_ADC
- 自己写的Atmega64A 上的ADC测试程序，ADC转换结果通过串口输出-This test code can run in the Atmega64, get ADC sample value and output the result by UART
IIC
- 基于stm32固件库的IIC1与IIC2之间通信，IIC1作为主发送，IIC2作为从接收。-Based communication between STM32 firmware library IIC1 the IIC2, IIC1 as the main transmission IIC2 from the receiver.
SPI_DMA
- 基于stm32固件库的两个SPI接口通信以及SPI的DMA通信。-Based on the STM32 firmware library, two SPI interface and SPI DMA communication.
weigen
- 韦根26读卡程序，使用51单片机开发也可一直到stm32，包含原理图和pcb-Wiegand 26 reader program, 51 MCU development may have been to stm32, including schematic and pcb
BMA150
- BMA150,本例程采用I2C通信，简单易用，能读出XYZ三个状态和加速度值，精度是11位，有正负值，对于有意开发此项目的人有一定的帮助。直接移值过去就可以用了。 里面有BMA150的datasheet，原理图，和程序。拿来就用。-BMA150 is used to read the XYZ three-dimensional coordinates of devices, mainly for mobile phone acceleration sensors and security p
msp430f149-485
- msp430f149 485通信程序源代码，很全面的，通过测试能够直接运行。-MSP430F149 485 communication program source code, very comprehensive, the test can be run directly.
jisuanqijiyuSTM32
- 在keil环境下基于STM32F103ZE平台的触屏计算机-In the keil environment based on STM32F103ZE touch-screen computer platform
9
- PIC单片机（16f887）的电压检测及发送到串口通信-PIC microcontroller (16f887) voltage detector and sent to the serial communication
7
- PIC16f887A单片机实现的呼吸灯（基于PWM，1灯手动可调，1灯自动）-Breathing light PIC16f887A MCU (manually adjustable based on PWM, 1 light, 1 light)
CAN_Re
- STM32的CAN通信接收程序，在STM32F103ZET6板子上测试通过-STM32 CAN RX Demo code
user_can1
- STM32F103ZET6-CAN通讯底层驱动，采用操作寄存器的方式实现，CAN环回测试-STM32F103ZET6-CAN communication underlying driver, the operation register means to achieve CAN loopback test
Application-Software
- STS DWAM80 无线传输的源程序.可用于点对点及一对多点音频传输-STS DWAM80 wireless transmission of the source can be used for point to point and point-to-many audio transmission