资源列表
LSD-TEST430F5438-01-DMA1.c
- msp430F5系列DMA程序,实现RAM存储空间存储(重复块传送)-Msp430F5 series DMA program, RAM storage space storage (repeat block transfer)
Multifunction-Clock
- 多功能电子钟 显示时间:点阵、数码管、独立LED、液晶。校对时间:板载按键、遥控器 闹钟:蜂鸣器-Multifunction Clock displays the time: dot matrix, digital control, independent LED, LCD. Proofing time: on-board buttons, remote control alarm: Buzzer
MCP2515
- CAN总线通讯,单片机通过模拟SPI与MCP2515通讯,从而与其他CAN节点通讯,经测试可以用。-CAN bus communication, microcontroller through the simulation of SPI and MCP2515 communications, and other CAN node communication, the test can be used.
SIM908datasheet
- 这个文件是针对gprs+gps二合一模块sim908的硬件开发指导,同样适用于sim808和sim800,对于在做相关开发的朋友应该有用!-This document is for gprs+ gps combo module sim908 hardware development guidance, and the same applies to sim808 sim800, for friends are doing related development should be useful!
TLV5638
- 德州仪器数字DA芯片 TLV5638的STM32程序,部分宏定义,可直接使用-Texas Instruments TLV5638 the STM32 chip digital DA program, part of the macro definition, can be used directly
DS1302
- 基于stm32的DS1302时钟驱动程序,直接调用即可,里面包含.c和.h文件-Based stm32 the DS1302 clock drivers can be called directly, which contains .c and .h files
stepper-motor-controller
- 对可编程步进电机控制器原理图,工作原理,配套程序做出详细的讲解-Programmable stepper motor controller schematics, operating principle, supporting program make a detailed explanation
OLED-spi
- STM32单片机;OLED程序,使用SPI总线。-STM32 Microcontroller OLED SPI.
EM30919红外传感器C程序
- EM30919红外测距传感器C程序,IIC总线,MSP430单片机
STC-ISP-V4.83-NOT-SETUP-CHINESE
- 将程序hex文件通过串口下载到单片机的一款软件,版本为4.83版本,比较新-The program hex file to the microcontroller via a serial port to download software, version 4.83 version, relatively new
51MPU6050
- 这个陀螺仪mpu6050在51单片机上使用程序,能故读出mpu6050的各个数值,测试通过,只是读取时比较的慢-The gyroscope mpu6050 in the 51 microcontroller on the use of the program, can read the mpu6050 of the various values, testing through, but read more slowly
12864
- msp430f149的ad采集在12864上画波形程序-The ad msp430f149 draw waveform acquisition program 12864