资源列表
BLDC HALL_0722_ok_发货
- 无刷电机驱动代码，STM32的，网上500的无刷电机驱动源代码(Stepper motor driver code, STM32)
Modbus完整资料
- 完整的Modbus资料，看过从初学到应用。 Modbus完整资料(Modbus详解电子书 libmodbus源码库 Modbus标准协议 Modbus测试大纲 Modbus调试工具)(Complete Modbus information, read, from beginner to application. Modbus complete information (Modbus detailed e-book, libmodbus source library, Modbus standar
BOOTLOADER
- 基于CAN总线的 STM32F103 的BootLoader，上位机+下位机程序(STM32F103 based on CAN bus, BootLoader, PC + lower computer program)
tm7707
- TM7707的驱动函数，差分采集电压，设置滤波与放大增益(TM7707 drive function, differential acquisition voltage, set filtering and amplification gain)
stm32f407源代码
- STM32F407(高配版V3.1)资料，各功能的程序源代码！(STM32F407 (high version V3.1) data, the function of the source code!)
STC嗡嗡四轴飞控程序
- 基于51系列单片机的四轴飞行器主控源代码(Main control source code of four axis aircraft based on 51 Series MCU)
8×8×8光立方程序、原理图及PCB等制作资料
- 8*8*8光立方 pcb 程序 制作资料教程 帮助你更好的学习制作一款属于自己的光立方(8*8*8 Light Cube PCB program to produce data tutorials, to help you better learning to make a light cube of their own)
2.8TFT_ADC_Wave
- ADC0通道采集电压以波形形式显示到2.8寸TFT触摸液晶屏上，ADC输入管脚为60管脚(ADC0 channel acquisition voltage to waveform display to the 2.8-inch TFT touch LCD screen, ADC input pin for the 60-pin)
51.舵机控制程序
- 基于单片机的舵机控制程序代码，已编译过。(Microcontroller based steering engine control program code, has been compiled.)
【19】DMA PWM WS2812 GPIO输出16组
- STM32作为主控芯片，72Mhz，利用DMA+PWM实现驱动WS2812，创建16个并行800kBit / s数据流的想法如下： 使用定时器每1.25us创建一个800kHz的时基和一个DMA请求。 使用2个比较模块在低位时间（350ns）和高位时间（700ns）下创建DMA请求 1.25us DMA请求将GPIO端口的所有位设置为高电平 350ns DMA请求将数据从帧缓冲区传输到GPIO端口。如果该位为0，GPIO引脚将变为低电平，否则将保持高电平。 700ns DMA请求将所有
Get Pressure
- STM32F103RCT6,通过IIC驱动BMP280，获得气压、温度、高度等数据，实测得出数据很正常(STM32F103RCT6, through the IIC drive BMP280, access to pressure, temperature, height and other data, measured data is normal)
《爱上Arduino》中文版
- Arduino虽然小巧但是功能齐全，本书是Arduino中文社区推荐用书，值得去学习。(Arduino although compact, but full-featured, the book is recommended Arduino Chinese community book, it is worth learning.)