资源列表
adc10
- 单片机msp430x22x4的ADC转换读取温度-SCM msp430x22x4 read the temperature of the ADC conversion
9421
- 9421是一种新型数控电位器，内含四个独立电位器，功能极其强大。通过IIC总线与单片机通讯。包敬海原创。-9421 is a new, digitally controlled potentiometers, containing four separate potentiometer, extremely powerful. Through the IIC bus and Single-Chip Communication. Jing Hai original package.
uart
- 实现bq26500对于锂电池电压等数据的动态监测-Achieve the bq26500 Li-ion battery voltage and other data for the dynamic monitoring of
protel-99SE-Quick-Start
- Protel 99SE电路图设计步骤，主要讲原理图绘制步骤，含有附图，非常好学-Protel 99SE schematic design procedures, a major talking schematic drawing step, containing drawings, very eager to learn
yejing
- 本制作是用液晶显示时钟，并且时间可以任意的调节-This is the clock with LCD display, and time can be arbitrary regulation
S6_VGA_change
- 利用cpld作为控制器实现驱动vga显示器，虽然只有8位色，但是实现方式只得借鉴，这个可以利用按键实现图片的相互切换-Used as a controller to achieve cpld drive vga display, although only 8-bit color, but the implementations are only for reference, this can be achieved using buttons to switch between images
usb-device-massstorage-project-at91sam9263-ek-iar.
- ARM9263的实例程序，已经编译通过了-ARM9263 examples of procedures for
4MTR
- MSP430接4M晶振串口通信程序，给大家只供参考用，还请各位多多指教-MSP430 then 4M crystal serial communication program for everyone to use for reference only, but also the exhibitions please
STR711Modbus
- 一个ARM7上开发的Modbus协议示例，该程序在万利STR7开发板开发。主要功能为人机界面通过串口0连接开发板，开发板通过串口1连接从机板，三者之间通过ModbusRTU协议进行数据通信。另外还可以通过串口2进行远程通讯。该功能开发板作为从机，远程设备做为主机。程序采用ucos_ii操作系统实现。-An ARM7 developed on the Modbus protocol examples, the program Manley STR7 development board develo
SPI
- 基于SPI接口的ARM程序及各种调试资料，丰富齐全。-ARM-based SPI interface procedures and a variety of debugging information, a rich and complete
25cl64
- VRS51L3074与SPI接口器件FM25CL64的通讯程序-VRS51L3074 with the SPI interface device FM25CL64 Communication Program
DS18B20
- DS18B20温度检测：通过单片机的精确控制芯片DS18B20的时序，并结合数码管来显示，达到温度检测的目的。-DS18B20 temperature detection