资源列表
vtvt_tsmc180_release
- 弗及利亚理工开发的T$MC180nm数字开发库-T$MC 180nm digital lib from VT
CORDIC_SINE
- 在ISE10.0下的CORDIC算法产生正弦波，可控制其幅度等参数-Under the CORDIC algorithm in the ISE10.0 produce sine wave, its amplitude and other parameters can be controlled
HC-SR04
- 基于stm32f103单片机的源码，使用HC-SR04超声波模块，将测得的数据显示在Nokia5110的屏幕上-Stm32f103 based microcontroller source, using ultrasonic module HC-SR04, the measured data is displayed on the screen Nokia5110
dsp5509_code
- DSP 5509A的各模块代码(timer、rtc、gpio、FFT、sdram、AD等 )-Each module of code DSP 5509A
ydz
- 了解有关单片机系统的基础知识。 掌握MCS-96系列单片机的软件编程技术。 具备一定的硬件设计能力，能够设计简单的单 片机应用系统。 -Learn more about the basics of SCM systems. Master microcontroller MCS-96 family of software programming. The hardware design with a certain ability to design a simple mic
stm32_DMX512
- SMT32 DMX512标准协议程序，可实现远距离485通信。值得参考。-SMT32 DMX512 standard protocol, which enables remote 485. Worth considering.
s5pv210
- s5pv210裸机开发，从最基本的编译环境，到各个外设的驱动编写，深入到rtos，嵌入式gui， 文件系统，网络协议等等中间件的移植及应用-S5pv210 bare metal development, the most basic compiler environment, to the peripheral driver to write, into the rtos, embedded gui, file system, network protocol, and so the midd
201020721171
- 里面有几个利用c++实现的例子使用的是<iostream>文件-There are a few example uses use c++ achieve <iostream> File
LPC1700-USB-bootloader
- nxp 1768处理器采用USB接口时的bootloader,采用C源码编写，包含在一个工程文件中-nxp 1768 processor uses the USB interface bootloader, written in C source code is included in a project file
ucGUI_test(12.01.30)
- UCGUI在STM32F103RBT6上的移植,不带UCOS-UCGUI transplantation in STM32F103RBT6 on
iar_02
- 三星单片机9488,一直在摸索着用IAR，今天终于连接上了OPENICE 500 仿真器，也搞清了调试模式和代码生成模式的大体区别， 希望对后来的初学都有点帮助 共有三个视频，高手就不用看了啊，我也只是初学者，IAR的设置对没 用过IAR的人来说有点迷湖-Samsung' s single-chip 9488, has been exploring the use of IAR, is finally connected to the OPENICE 500 s
stc89C52-ruanjian
- 这是一款单片机烧写软件，可将程序下载到硬件上-This is a microcontroller programming software can be downloaded to the hardware