资源列表
STM32
- ST官方给出的全部驱动包，调试完成，编译通过，硬件调试下通过！-this file consists of all the driver files provided by ST，anybody could download if you need ，U R welcome
51bookpdf
- 51单片机学习的非常好的资料，这本书从浅到深的介绍了51单片机及其外围电路的设计。-51 Single-chip learning is very good information, this book from shallow to deep introduction to the 51 MCU and its peripheral circuit design.
uCosII_Sem
- 该工程是在keil4上进行开发的，主要应用了ucosii的信号量功能。-The project is developing on the keil4, the main application of the ucosii semaphore functions.
ddr_100Mhz_2011.03.12
- 这个工程是用xilinx的MIG生成的对于spartan 3E的实验板的ddr的控制器，我已经能够在上面修改之后加入自己的思想，包括两个dcm的模块。-This project is the MIG generated by xilinx spartan 3E development board for the ddr controller, I have been able to modify the above by adding his own ideas, including the t
STM32MenuManager
- This application is working example on using menu, lcd, SD card and timer. It should be used on stm32f429 discovery board, but it can also be adopted to othe STM microcontrollers
S12DG128
- FREESCALE S12DG128 全套技术文档-FREESCALE S12DG128 a full set of technical documentation
频率测试程序
- 计算方波信号的频率5Hz到500KHz可测，需要的可以下载(The frequency of the calculated square wave signal is 5Hz to 500KHz, which can be downloaded)
usb_i2cmonitor
- 用于监视I2C通信总线，反馈至PC显示，其中PA0为SCL，PA1为SDA，支持400kbps/100kbps两种I2C通讯模式-I2C communication bus for monitoring, feedback to the PC show for the PA0 one of SCL, PA1 for the SDA, to support the two I2C communication mode 400kbps/100kbps
IAR
- AVR(R) IAR Embedded Workbench(R) IDE用户手册的这部分包括以下章节： 创建一个应用工程； 使用 IAR C-SPY调试器进行调试； C 与汇编语言模块混合； 使用 C++； 模拟一个中断； 使用库模块；-IT S A good book ti s about IAR study. AVR(R) IAR Embedded Workbench(R) ID
DDS
- DDS函数信号发生器，这是我在xilinx平台上实现的，可以产生不同频率，不同函数形式的函数信号。如三角波，方波等-DDS function generator, this is my on xilinx platform, can produce the function of different frequency signals.
IARAVR
- AVR IAR相关资料，希望对大家有帮助.
armok01166078
- AVR C 语言的应用说明，和应用例程。详细的介绍了IAR C的应用