资源列表
PWM测试最简版本_OK
- 通过配置stm32的TIM3的通道2，使它能输出PWM波形，然后通过改变占空比寄存器，改变波形。(By configuring the channel 2 of the STM32 TIM3, it can output the PWM waveform, and then change the waveform by changing the duty cycle register.)
SD-card-source
- SDcard 开发过程中收集的SD卡源码、协议、尺寸规格等-SDcard development process to collect the SD card source, protocol, sizes, etc.
fwlib
- stm8 library (st microcontroller)
STM32F0-for-uCOS_II-template
- 基于STM32F0的UCOS_II模板，创建了一个串口打印任务和两个LED闪烁任务，在ST NUCLEO-F091RC开发板上测试通过- Based STM32F0 of UCOS_II template to create a serial print job tasks and two LED flashes, the test ST NUCLEO-F091RC development board through the
LPC900_ALL
- 学习LPC900系列单片机的好帮手。 全部范例来自ZLG网站。整理打包。 包括所有功能硬件范例。-LPC900 MCU learning a good helper. All sample sites from the ZLG. Finishing packing. Examples include all the features of the hardware.
applicationsexammplesofavr
- 一款高性能的单片机avr的各种应用实例，很强大啊，谢谢 -A high-performance single-chip applications avr example, it is strong, ah, thank you
yima1
- 本程序是在Xilinx ISE上编写的，它是（7,3）码的另外一种译码方法。里面有源程序和用以仿真的测试文件-This program is written in the Xilinx ISE, it is another (7,3) code decoding method. Source and for the simulation of the test file inside
NxpRdLib_PublicRelease
- NXPrfid所有高频通信协议的底层驱动函数，还有一些示例，用VS2005以上版本打开-NXP rfid underlying driver of all high-frequency communication protocol function, there are some examples of open VS2005 version
wifi-And-beidou
- 此程序通过定时接收北斗定位信息，以及实时刷新货物的上车下车，并实时把数据传到上位机-This program can receive Beidou positioning information, and refresh the goods get on and off, and real-time data to the upper computer
2.4G-receive
- STM8 2.4G接收初始化,和把接收到的数据来输出PWM。- STM8 2.4G receive initialization, and the received data to output PWM.
风力摆8.3
- 2015年电赛控制类风力摆程序，适合研究pid(2015 electric race control type wind pendulum program)
temp
- 自己做的51单片机温度监控的上位机程序，VC6.0工程-Do their own 51 single-chip temperature monitoring PC program, VC6.0 project