资源列表
BF533_Booting_src
- ADI公司BF533的booting code源代码。
SRAM-PINGPANG
- 超声视频图像需要实时地采集并在处理后在显示器上重建，图像存储器就必须不断地写入数据，同时又要不断地从存储器读出数据送往后端处理和显示[11]。为了满足这种要求，可以在采集系统中设置2片容量一样的SRAM，通过乒乓读写机制来管理。任何时刻，只能有1片SRAM处于写状态，同时也只有1片SRAM处于读状态。工作期间，2片SRAM都处于读写状态轮流转换的过程，转换的过程相同，但是状态错开，从而保证数据能连续地写人和读出祯存.
数字信号处理的fpga实现
- 数字信号处理的fpga实现，用VHDL语言编程实现IIR滤波器,Digital signal processing to achieve the FPGA, using VHDL language programming to achieve IIR filter
22
- VHDL语言实现三人表决器控制电路，有优先级自主设定等功能-VHDL language to achieve three of the voting machine control circuit, a priority setting features such as autonomous
xwx
- 选择合适的数字式温度传感器，通过单片机读取现场温度，并通过点亮LED 灯的位数来实时指示当前温度的高低。-Select the appropriate digital temperature sensors, temperature by the microcontroller reads the site, and the number of bits through the lit LED lights to indicate the current temperature level of
CSB
- 使用avr实现HC-SR04的测距功能，精度为1cm，精度较高-HC-SR04 achieved using avr ranging functions, accuracy 1cm, high precision
STC12C5A-ADC
- STC12C5A系列单片机AD转换和数据滤波程序-STC12C5A serials MCU ADC
between-PC-and-MCU-based-on-USB
- PC机向单片机发送一串数据，然后由LCD显示出来，且发送的数据返回PC机显示，通过串口通信助手-The PC to the microcontroller to send a bunch of data, and then by the LCD display, and send data back to the PC through the serial port communication assistant
TemMain
- 基于51单片机的时钟芯片ds1302的控制程序，可以直接移植到类似单片机使用-Based on 51 MCU clock chip ds1302 control procedures, can be directly transplanted to similar platforms
jiaotongdeng
- 实现对十字路口红绿灯的控制，含有外部中断，应对十字路口的突发情况。-To achieve the control of traffic lights at the crossroads, containing external interrupt, to deal with the intersection of the unexpected situation.
shangweijixieyi
- 示波器串口协议，通过串口协议可以将数据通过串口传输到上位机。-Oscilloscope serial protocol, through a serial port protocol data through the serial port can be transmitted to the PC.
src
- 独立键盘的使用，基础操作方式，C语言，51单片机-Independent use of the keyboard, basic mode of operation, C language, the microcontroller 51