资源列表
51541515
- 做项目时的部分源码1！现在传上来与大家共像想！请不要用于商业用途！
spwm.rar
- 用单片机定时器产生的spwm波 仅使用两个定时器，得到比较精准的spwm波形。,With the MCU timer generated spwm wave
cx12864
- 12864液晶显示的串行通信程序，采用单线数据传输，经测试，绝对可用-12864 LCD serial communication program, using one-way data transmission, tested, absolutely free
tt
- 用51的定时器做的精确设置时钟程序 晶振11.0592M的i为115；12M的i为125； 由Delay 参数确定延迟时间-Timer with 51 settings to do the precise crystal clock procedures 11.0592M of i for the 115 12M of i for the 125 by the Delay parameter determines the delay time
WXRAMB
- 程序对片内数据存储器(4K RAM)实现读/写操作，先在地址//0000---00FFH写入数据，再读出进行比较是否正确,若不正确蜂鸣器响一声-Procedures on-chip data memory (4K RAM) to achieve read/write operation, first in the address// 0000--- 00FFH write data, read out the comparison is correct, do not say the right
Archive
- AVR atmega16电调调试器IIC通讯协议-AVR atmega16
zhongduan
- C8051f 系列单片机控制中断的c语言程序代码-C8051f series SCM interrupt code c language
kalman
- 将加速度传感器得到的倾角值和陀螺仪得到角加速度值通过卡尔曼滤波程序得到稳定正确的倾角值-Will the dip Angle acceleration sensor get value and the gyroscope get Angle acceleration value through the kalman filter to get the correct program stable Angle value
ex1
- 检测脉搏波的S52单片机程序 主要是将脉冲信号级数并显示-Detect the pulse wave of S52 microcontroller program is the pulse signal series and display
led
- 在MSP430F149上的LED驱动实验程序-Experimental procedures for the LED driver on the MSP430F149
0809.c
- dac0809 C语言程序 声音录制 adi-dac0809 C language program sound recording adi
lcd_1
- LCD顯示控制，簡易控制，適合基礎人員學習-LCD display control, easy control, for the basis to learn