资源列表
part8
- s3c44b0 qudong 程序原码 以及各种驱动接口的原码 书中自带的程序-s3c44b0 qudong procedures original code-driven interface, as well as the original book, bringing their code procedures
seg
- 7段数码管显示的VHDL语言,适合初学者用,相当不错的
用Verilog语言实现QPSK调制
- 用Verilog语言实现QPSK调制,QPSK是一种数字调制方式。它分为绝对相移和相对相移两种。 -Verilog language using QPSK modulation, QPSK is a digital modulation. It is divided into absolute and relative phase shift of the phase shift of two.
gen_nx64k
- N×64K数控分频模块,可将2.048M时钟分频为一个NX64k的时钟,在E1复用设备上应用。 -N × 64K NC frequency module can be 2.048M NX64k clock frequency for a clock, the E1 multiplexing equipment apply.
switch
- 该模块是一个基于verilog的脉冲触发高低电平保持的模块,同时包含了消抖的功能。 主要是针对现今许多开发板上开关是弹簧式的手按下去为低电平,手一松就变成了高电平。只要按一次松开后,模块就能自动输出一个低电平。(板子上的开关正常情况为高电平) 同时消抖部分在输入clk为50Mhz的时候可以延迟21ms来判断是否为开关按下-The module is based on verilog pulsed high-low to keep the trigger module includes b
PWM
- 基于C51单片机的PWM调光程序,利用矩阵键盘控制改变PWM的占空比。-C51-based single-chip PWM dimming process, the use of matrix keyboard to control the PWM duty cycle changes.
triangular_wave
- sr flipflop verilog you can simulate it in any eda tool
chdw
- 实现信号的短时傅里叶变换以及魏格纳变换的对比程序,运行无错误,适合做信号处理的学者使用-Short time Fourier transform signal comparison process as well as the Wigner transform, run error-free, suitable for a scholar to do signal processing
vga
- 一个VHDL的VGA显示程序,设置的分辨率为640*480,这个程序很简单,仅供参考。-A VHDL VGA display, set the resolution to 640* 480, the program is very simple, for reference only.
LCD12864useIO
- TI公司的DSP TMS320F28027 使用普通IO驱动LCD12864 的代码,欢迎大家的下载使用!-TI' s DSP TMS320F28027 the ordinary IO driver LCD12864 code, we welcome the download!
Infinite-Impulse-Response-Filter-CodeWarrior
- This is an IIR filter implementation in CodeWarrior for the SC140 digital signal processor, it requires the MATLAB program in order to work.
key
- 键盘输入测试程序,CPU为DSP2407,其中有消除抖动处理,键盘故障处理等子程序。-Keyboard input test procedure, CPU is DSP2407, which eliminate the dithering process, keyboards and troubleshooting routines.