资源列表
c32
- GENERIC PROGRAM FOR A FAST LOOPED-CODE RADIX-2 DIT FFT-GENERIC PROGRAM FOR A FAST LOOPED-CODE RAD IX-2 DIT FFT
ucos-ii+lpc2129
- IAR ARM + uC/OS-II2.76 + LPC2129-IAR LPC2129 ARM uC/OS-II2.76
4x8test
- ATMEGA128....液晶显示程序-ATMEGA128 .... LCD procedures.
110detector_lab
- 一个简单的探测110三位的探测器，用逻辑图和vhdl描述，包括实验报告和测试图。-a simple survey of 110 three detectors, and a logical map vhdl descr iption, including reports and experimental test plan.
add_sub_lab2
- 实验课的作业，包括半加器、全加器、加/减法器，使用逻辑图和VHDl描述，包括分析和报告。-experiment include the operation of a half adder, full adder, plus / subtraction device, and the use of logic diagram VHDl descr iption, including analysis and reporting.
SMDK2440_Serial_downloader_firmware
- ＳＡＭＳＵＮＧ２４４０ ＢＯＯＴ ＣＯＤＥ，ＳＵＰＰＯＲＴ ＳＥＲＩＡＬ ＤＯＷＮＬＯＡＤ．ＣＯＭＰＩＬＥＤ ＵＮＤＥＲ ＡＸＤ．-SAMSUNG2440 BOOT CODE, SUPPORT SERIAL DOWNLOAD. COMPILED UNDER AXD.
wishbone_i2c_master
- -- WISHBONE revB2 compiant I2C master core -- -- author: Richard Herveille -- rev. 0.1 based on simple_i2c -- rev. 0.2 april 27th 2001, fixed incomplete sensitivity list on assign_dato process (thanks to Matt Oseman) -- rev. 0.3 may 4th 200
tst_ds1621
- -- State machine for reading data from Dallas 1621 -- -- Testsystem for i2c controller--- State machine for reading data from Dall as 1621 -- -- Testsystem for i2c controller
I2C_1.1
- Simple I2C controller -- 1) No multimaster -- 2) No slave mode -- 3) No fifo s -- -- notes: -- Every command is acknowledged. Do not set a new command before previous is acknowledged. -- Dout is available 1 clock cycle later as cmd_a
fat_C
- FAT的C语言原代码,没有底层驱动,支持打开文件,读写文件,不支持长文件名.-FAT C language source code, there is no bottom-driven support to open the document, read and write documents, do not support long file names.
ATmega16L_IDE
- ATmega16L控制IDE硬盘的源代码,可以读写扇区,无文件系统-IDE hard disk source code, can read and write Sector, no file system
philips_usb
- 51单片机控制USB的源代码,不带DMA控制功能.-51 USB MCU control of the source code, non - DMA control functions.