资源列表
study-report
- 我做毕业设计两个多月来的总结，基于ARM7的以太网通信设计，用的S3C44B0芯片，uClinux系统，包括详细的开发步骤，内有源码，适合初学者-graduated more than two months to design the summary, based on ARM7 Ethernet Communication Design, The S3C44B0 chips, uClinux system, including the development of detailed steps
basicTWI
- 基于AT91RM9100的TWI的简单实现, 测试通过,没有问题,是非常难得的资料哦-TWI simple realization of the test, no problem, is a very rare information oh
five_chess_game_code_For_S3c44b0x
- 基于SANGSUNG ARM7嵌入式微处理器的S3C44B0开发的五子棋游戏程序-SANGSUNG ARM7-based embedded microprocessor development of the 331 S3C44B0 You opera procedures
4x4KeysFOR44B0X
- 基于SANGSUNG arm7嵌入式微处理器S3C44B0开发的4X4键盘程序-based SANGSUNG arm7 S3C44B0 embedded microprocessor development of the 4x4 keyboard procedures
uart_comm4510
- 嵌入是微处理器ARM7三星4510B的串口程序-is embedded ARM7 microprocessor Samsung 4510B Serial procedures
chrdevDriver
- 基于linux2.6内核的字符驱动的编写,调试过程,在PC机和s3c2410嵌入式系统中正常可用.-linux2.6 based on the kernel of the character-driven preparation, debugging process in the PC and embedded system s3c2410 normal available.
touchscreeAndUsbkeyboardMouseDriver
- 包含触摸屏驱动源码(for s3c2410)以及触摸屏驱动,USB键盘鼠标移植详细步骤,tslib触摸屏校准程序的移植使用,包括错误解决方法.-contains Touchscreen driver source (for s3c2410) and touch-screen, USB keyboard and mouse transplantation detailed steps tslib Touchscreen calibration procedure transplant use, i
linuxdevicedriver3example
- linux设备驱动第三版上的例子源码，已经调试通过的-third edition of Linux Device Drivers on the example source code, debugging has been adopted by the
s3c2440_vivi_y2.0.tar
- s3c2440 bootloader 源码，支持nand flash 启动，支持串口升级。-s3c2440 Bootloader source support nand flash activated Serial support escalation.
ld2440a_16_rev03_040330(16-bit_NAND_Boot_Loader_So
- s3c2440 nand 启动代码（16位方式）-s3c2440 nand bootcode (16 way)
u-boot-1.0.0
- uboot for at91rm9200dk，可以直接使用的，已经移植好的。-uboot for at91rm9200dk, can be directly used in transplantation has been good.
44b0LEDtest
- 三星44b0的测试程序，运行后，三个LED在闪，因为程序没有初始化串口，所以运行后超级终端没有反应-Samsung 44b0 testing procedures, operation, the three LED flash, initialization procedure because no serial port, run after the Super Terminal no response