资源列表
shebeiqudong
- LINUX系统下的设备驱动程序 具体到LINUX系统里，设备驱动程序所提供的这组入口点由一个结构来向系 统进行说明-LINUX system device driver specific to the Linux system, device driver provided by this group from the point of entry to a structure to the system descr iption
intelstrataflash
- intel strata flash插写程序，可用于embedded系统开发。-intel strata flash write interpolation procedures can be used for embedded systems development.
my_audio
- 我写的基于2410的音频播放的程序，采用c/s结构，pc客户端上传音频流，服务器端建立帧缓冲区接收，并播放出来-I wrote based on the 2410 Audio Player procedures adopted c / s structure, pc client uploads audio streams, the server-frame buffer zone established to receive and broadcast
serialudp
- 我的毕业设计，ARM7的以太网应用，串口与以太网数据互发，使用的uclinux系统，支持多线程，所以在你编译uclinux的时候请选择uclibc库而不是uc-libc。文件中包含了源码和Makefile文件，image里是编译后生成的文件，可以直接烧录进板子，但是请注意板子的配置，我的是44B0的公板，不同的板子请在编译uclinux的时候重新配置好-I graduated from the design, the ARM7 Ethernet, serial and Ethernet Data
SimpleforS3C2410
- 注意编译环境：ARM-Linux，这是一个为S3C2410入门者所写的简单但是较全面的源代码，编译时请注意相应参数的修改，学习S3C2410开发，从这里开始！-attention to the build environment : ARM-Linux. This is a S3C2410 for beginners written a simple but comprehensive source code, Please note that compile-time parameter ch
swifor2410
- 基于ARM920T内核的S3C2410下的SWI（软件中断）程序，ARM所作-Based on ARM920T core of the S3C2410 SWI (software interrupt) procedures, ARM made
databortfor2410
- 基于ARM920T内核的S3C2410下的databort（数据异常模式）程序，ARM所作-Based on ARM920T core of the S3C2410 databort (data anomaly pattern ) process by ARM
microwindows.example10
- 基于嵌入式图形库microwindows的简单示例程序10例-embedded graphics library based on the simple example microwindows procedures in 10 cases
6.1_MiniGUI_uCLinux_yizhi
- MInigui的移植实验,针对Smartarm2200开发板-MInigui transplant experiments, the development board against Smartarm2200
bootloader_for_TIDM270
- 针对德州仪器DM270开发板的bootloader,其实现了内核的下载以及文件系统的下载-against Texas Instruments DM270 development board Bootloader, realize the kernel download and download the file system
Farks_x
- Keil for Arm Philip2124系列-Keil for Arm Philip2124 Series
rtlinux-3.2-pre3
- rtlinux-3.2-pre3.tar.bz2 rtlinux3.2-pre3的源代码-rtlinux-3.2-pre3.tar.bz2 rtlinux3.2-p re3 source code