资源列表
51单片机万年历
- 这是个非常实用的关于51单片机的一个万年历设计，有需要的可以借鉴参考一下
Serbo-robot同步机械臂
- 三个电位器控制三个舵机，实现同步机械臂，带动作记忆功能(Three potentiometers control three servos to realize synchronous manipulator with action memory function)
温控制系统
- 51单片机+DS18B20 温度采集系统 附程序源码和仿真 含PID算法(51 single chip microcomputer + DS18B20 temperature acquisition system with program source and simulation including PID algorithm)
BLDC_Code
- stm32f103c8t6 做主控 自制无刷电机(bldc )控制板，支持有感和无感两种模式。可通过硬件切换。内部包含原理图和源代码及照片，原创资料。(Stm32f103c8t6 is used as the control board of BLDC, which supports the two modes of sensing and non sensing. It can be switched by hardware. The interior contains schematic d
绝对值编码器+代码+forSTM32
- STM32 读取绝对值编码器数据，HAL库(STM32 reading encoder data)
红外无线通信
- 基于proteus仿真，通过红外模块实现两片单片机间的通讯控制，实现将光照强度转化为灯光开关的信号(Using of the IR Block to accomeplish the texting between two SCMs.)
ModBus-Master C8 - 多个从机
- STM32作为主机通过modbus协议实现读取三个从机的数据，三个从机的站号分别为1，2，3。(STM32 is used as the host to read the data of three slaves through Modbus protocol. The station numbers of three slaves are 1, 2 and 3 respectively.)
OneNET_BC95_LWM2M_0631
- 1.该程序是基于中移物联网的M5310模组的Demo移植而来，适用于移远的BC95_B8模组,功能与原程序基本一致，具体配置方法见main.c和bc95_config.h相关注释。 2.为了方便大家使用，去掉了传感器的驱动代码，可根据自己的需要添加传感器驱动代码，将read_callback()和res_update()函数中相应位置替换为你自己的传感器值。(1. The program is based on the demo migration of m5310 module of Chin
stm32f103驱动hc595
- 基于stm32F103编写的控制96个led灯，非流水灯，每个灯独立控制，可随意点亮熄灭(Based on stm32F103 to control 96 led lamps, non-flowing lamps, each lamp is independently controlled, can be turned on and off at will)
stm32实现GPS定位功能
- stm32实现GPS定位功能，可以移植到任意的正点原子F4系列开发板，亲测有用。
智能门锁
- 蓝桥杯模拟题,智能门锁的设计，包含题目和代码(lanqiaobei ' s mo ni ti)
FU6831 无感低压吊扇 双电阻-带掉电记忆-HKJ
- 用于调试开发，峰岹FU6831例程成功开发案例(For debugging and development, the successful development case of Fengyi fu6831 routine)