资源列表
红外测温模块MLX90614驱动程序
- IIC代码示例，I2C示例代码驱动红外测温模块MLX90614(the source code of IIC)
蓝牙程序
- 蓝牙模块HC-05的STM32程序，使用STM32F103对蓝牙模块HC-05控制。(The STM32 program of Bluetooth module HC-05 uses STM32F103 to control Bluetooth module HC-05.)
tf_mini_sdk_test_ok
- 最近在调一个tf mini激光传感器，虽然是用串口接收的，但是网上没找到stm32的例程，便自己根据文档协议，写了个检测例程。亲测可用。(Test is available. I recently adjusted a tf mini laser sensor, although it was received by the serial port, but the stm32 routine was not found on the Internet, and I wrote a detect
Contiki-stm32f103
- stm32 contiki 3.0源代码 IAR打开就行(Stm32 Contiki 3 source code IAR opens on line.)
语音交互2.0
- 基于LD3320语音识别芯片和SYN6288语音合成芯片(Speech recognition chip and SYN6288 speech synthesis chip based on LD3320)
调光灯
- 采用STC单片机的LED调光灯，配有原理图和源程序。
四合一传感器-V1.0-改
- M0+ NXP824控制LORA芯片，ZM470SX和SHT31,MAX44009(M0+ NXP824 control LORA chip,ZM470SX AND SHT31,MAX44009)
STM32(普通IO 模拟串口)
- 利用STm32普通IO口实现串口功能，可以弥补串口不足的缺点(Using STm32 common IO port to realize serial port function)
DMX512发送程序1
- DMX512发送程序，STC单片机开发源代码 希望有用(DMX512 send program, STC microcontroller source code to develop useful)
三位数码管显示0~24V电压SN8P2711
- 通过SN8P2711的AD口采集电压,在三位数码管上显示出来,可测量0~24V电压,误差范围在+-0.5V(The voltage is collected through the AD port of SN8P2711 and displayed on three digital tubes. The voltage can be measured from 0 to 24V. The error range is +0.5V)
LTC3300_code
- 电池均衡 LTC3300的均衡程序 主动均衡(Battery Balance LTC3300 Balance Program Active Balance)
电源信息第一版
- 嘉佰达软件通信协议（电源）串口屏显示，，，，，，，，，，，，，，，，，(Jiabaida Software Communication Protocol (Power Supply) Serial Port Screen Display)