资源列表
LEDcontrol
- 通过使用51单片机的定时器功能，控制P89V51RD2单片机实验板上的8个LED灯。要求上电复位后，每个LED跑马灯的点亮时间为500ms，每按一次INT0键并产生外部中断后，LED灯的点亮时间减少10ms，并将当前点亮时间(500 490 480…)通过UART接口发至上位机(PC机)，点亮时间减到10ms后回到500ms进行循环。程序运行期间4位7段数码管显示当前点亮时间，显示不闪烁。-LED control
ILI9342PHSD2.3
- 这个是9342的测试程序，已经调试OK，希望可以帮助有需要的朋友。-This is the 9225 test program has debugging OK, I hope to help a friend in need.
HT162X
- HT162X液晶驱动芯片通用函数库，兼容HT1620/HT1621/HT1622 0/HT1623/HT1625/HT1626-HT162X Universal LCD driver chip library , compatible HT1620/HT1621/HT1622/HT16220/HT1623/HT1625/HT1626
TM1637
- TM1637汇编最新驱动程序 官方发布 天微电子LED数码管恒流驱动程序 多点阵-TM1637 driver Microelectronics constant current LED digital tube driver...
PWM_TIM2
- STM8S103F3利用TIM2 输出PWM IAR 开发环境-STM8S103F3 use TIM2 gereater PWM IAR
LTC6803
- 读写LTC6803，包括PEC校验程序，用于BMS电压采集。-Read and write LTC6803, including the PEC calibration program for the acquisition of the BMS voltage.
TDA7419
- TDA7419音频驱动，利用索引向量编程。-TDA7419 audio driver index vectors programming.
RFTran_4463
- 使用新唐mini51系列MCU 射频IC si4463 通过串口透传，数据收发，可以发送和接收超过芯片FIFO 64字节的长帧-New Tang the mini51 series MCU RF IC si4463 through the serial pass-through data transceiver can send and receive more than chip FIFO 64-byte long frame
PMSM_FOC_dsPIC33FJ32MC204
- 基于microchip公司的dspic33fj32mc204，在永磁同步电机上实现单电阻电流采样的foc控制源码，还有弱磁控制的哦。-Permanent magnet synchronous motor based on microchip company dspic33fj32mc204, single-resistor current the foc control sample source, the field weakening control.
Double-Pulse
- 此程序位IGBT 双脉冲测试程序。 第一个脉宽30us 第二个脉宽10us 并且给出了实验波形 包括脉冲波形和IGBT的工作波形-The program a IGBT double pulse test program. The first pulse width 30 us the second pulse width 10 us And the experimental waveforms Including pulse waveform and IGBT work
PWM
- STM32输出可控个数的PWM脉冲Keil工程：定时器主从方式输出可控个数的PWM脉冲，与比较输出模式输出脉冲比较，有以下优点：不用每个脉冲进行中断对脉冲计数，减轻CUP负荷。工程中附带软仿真配置，可仿真查看结果-Project the STM32 PWM pulse output controllability number Keil: Timer main controllable number of the PWM pulse output from the way, and compar
MusicFountain
- 这是基于STM32F103写的室内音乐喷泉的源代码（已包含发送接受程序），通过麦克风采集音频信号，STM32处理，并把控制信号通过24L01发送给另一个STM32，控制7个电机的运转-This is based the STM32F103 write the indoor musical fountain source code (included sending and receiving process), collected by the microphone audio signal,