资源列表
clark-and-park
- 本代码是CLARK和PARK变换的m文件和simulink模型，即从三相坐标变换到两相坐标的变换。-This code is CLARK and the PARK transform of the m file and the Simulink model, namely from the three-phase to two-phase coordinate transformation of coordinate transformation.
state_space_PID
- 本代码是PID在S函数中的实现，但不同之处在于，本代码先把PID变成状态空间表达式，更加易懂，为本人独创。-This code is the PID in the S function, but the difference is that, this code to put the PID into the state space expressions, more understandable, for my original.
main
- DSP5402通过McBSP模拟I2C总线，通过PCF8591 AD模块实现语音信号的采集。-DSP5402 through McBSP simulation I2C bus, to achieve the acquisition of the speech signal through PCF8591 AD module.
MC56F82478_AC_DAUGHTER_BOARD
- Freescale MC56F82748 daughter card compatibile with freescale ACIM power board with PCI-e connector.
lab8-39VF800
- lab8-39VF800测试板子的外扩flash用（采样板调试-external expansion lab8-39VF800 test board flash with (sampling board debug through)
SCIB
- SCIB（板上ram调试通过，在dgus屏和dsp中均以浮点数显示）-SCIB (ram-board debugging through, are displayed in dgus screen and floating point dsp in)
tiffsci
- tifft带SCI通信（可下载到flash中成功运行fft-ifft程序）-tifft with SCI communication (can be downloaded to a flash in the successful operation of fft-ifft program)
ADSPI
- 用spi实现AD与dsp串行通信，两块AD7606,有中断，在硬件调试上已经通过-AD achieved with spi serial communication with the dsp, two AD7606, an interrupt on the hardware debugging has passed
sci485
- dsp通过scic与计算机串口进行485通信时发送数据时应该先将数据送入txbuf，然后判断txempty是否为零，这样的话，就给发送操作流出了时间，而后再将485 的写使能信号拉低，防止发送操作是写使能信号已被拉低，数据写出给计算机串口时无法通过485芯片。-When sending data into the data should be first carried out when dsp 485 communication with the computer via serial por
3.3.3-DA
- 在DSPTMS2812中，对其DA输出端口进行设置的程序代码-In DSPTMS2812, DA output port to its set of program code
3.3.1-IO
- 在DSPTMS2812中，对其IO端口进行设置的程序代码-In DSPTMS2812, IO port to its set of program code
3.2.7-AD
- 利用 DSPTMS2812练习使用AD采样端口，对其进行设置-Use DSPTMS2812 practice using AD sampling ports, to set up