资源列表
RTD2270L-V2.2-update-tools
- RTD2270L V2.2升级指导及升级工具（合集）-RTD2270L V2.2 update tools。
ADSP-BF561-EZ-KIT-Lite
- bf561开发板开发资料，源码加说明，可以帮助深入学习dsp开发-bf561 development board development information, source code plus instructions that can help in-depth study dsp development
MK_BLDC-V0.41
- MK 电调程序，无刷直流电机BLDC 基于反电动势过零法，无传感器控制-MK,BLDC BRUSHLESS,EMF,ZERO
X5043_SPI
- DSP2812与X5043的通信程序，读写都经过测试。希望对大家有帮助。-DSP2812 and X5043 communications program
AD01
- 软件置位启动AD转换，实现ADC模块16路通道的采样。采样模式采用顺序采样。AD采样的触发方式采用软件置位的方式-Software setting start the AD conversion, the realization of channel sampling ADC module 16 road.In a sequential sampling mode.AD sampling way of trigger with the method of setting software
EvPwm02
- PWM1和PWM2输出频率为1KHz的PWM波形。波形的占空比每隔1s变化5 ,范围在10 到90 之间。 -PWM1 and PWM2 output frequency of 1 KHZ PWM waveform.Waveform of the duty ratio changes every 1 s 5 , in the range between 10 and 90
LedFlash
- 通过使用CPU定时器来控制LED灯D3的亮和灭，间隔时间由CpuTimer0来控制。-Using of the CPU timer to control the LED lamp D3 on and off .The time interval is controlled by the CpuTimer0.
07_Sci02
- 使用SCIA模块和PC机进行串口通信，等待PC机上的串口调试软件向DSP发送数据，DSP接收到上位机发送的数据之后，将这些数据发回PC机，显示在串口调试软件中。-Using SCIA module and PC serial port communication, Wait for the PC serial debugging software to send data to DSP, after DSP receiving the PC sends data, send the da
omapl138_ccs5_2
- OMAPl138的基本外设源代码，FLASH的，IIC的，GPIO的，SPI的-OMAPL138 source program
RS485_R
- 达芬奇系列开发板，rs485测试程序，用于检测DSP的rs485接口工作正常-Da Vinci series development board, DDR test program, used to detect between Dsp and rs485 interface to work normally
ddr
- 达芬奇系列开发板，ddr测试程序，用于检测Dsp和ddr之间的通路正常工作-Da Vinci series development board, DDR test program, used to detect between Dsp and DDR pathways to work normally
PWM
- 基于89c52的PWM产生程序，简单易懂-The PWM generator based on 89c52, easy to understand