搜索资源列表
shwtime
- 利用T0或T1定时器设计一电子表,显示格式为HH-MM-SS(即时-分-秒),使具有一般电子表功能-use of T0 or T1 design an electronic timer, showing format HH-MM-SS (instant-minutes - seconds), which is a general form of electronic functions
hh
- 哈司机哈萨阿嫂计算 阿苏军看到哈萨阿 阿苏进口货打击哈司机哈萨克拉 -Kazakhstan drivers Official Anthony calculation A Soviet see Official Aasu imported goods against Kazakhstan drivers Hasakela
AT91RM9200bootloader
- AT91RM9200-Loader,AT91RM9200的LOADER,HH的-AT91RM9200-Loader. the AT91RM9200 LOADER, the HH
4.5_rtc_test
- Embest S3C44B0X Evaluation Board RTC Test Example RTC Check(Y/N)? y Set Default Time at 2004-12-31 FRI 23:59:59 Set Alarm Time at 2005-01-01 00:00:01 ... RTC Alarm Interrupt O.K. ... Current Time is 2005-01-01 SAT 00:00:01
hh-at91rm9200-2.6(1)
- 笔者使用的是华恒公司提供的基于at91rm9200的开发板,公司提供的开发环境使用Linux内核是2.4, 交叉编译环境也比较老,由于笔者用到的驱动对2.4内核支持不好(尤其在arm上)。笔者决定自己移植2.6内核到该款开发板上,目前工作已经基本完成。 本文第一部分介绍了交叉编译环境的建立,基本内核的移植过程。其中对部分Linux源代码的修改方法虽然是适用于华恒的板,不过对其他平台也有借鉴价值。-author used the huaheng company based at91rm9200 d
hh-at91rm9200-2.6(2)
- 笔者使用的是华恒公司提供的基于at91rm9200的开发板,公司提供的开发环境使用Linux内核是2.4, 交叉编译环境也比较老,由于笔者用到的驱动对2.4内核支持不好(尤其在arm上)。笔者决定自己移植2.6内核到该款开发板上,目前工作已经基本完成。本部分主要介绍了jffs2文件系统的建立过程。-author used the huaheng company based at91rm9200 development boards, provide development environment
hh-at91rm9200-2.6(3)
- 笔者使用的是华恒公司提供的基于at91rm9200的开发板,公司提供的开发环境使用Linux内核是2.4, 交叉编译环境也比较老,由于笔者用到的驱动对2.4内核支持不好(尤其在arm上)。笔者决定自己移植2.6内核到该款开发板上,目前工作已经基本完成。 本部分介绍了几个驱动程序的移植过程,特别是显卡部分。-author used the huaheng company based at91rm9200 development boards, provide development environ
hh
- DSP的FIR滤波器的设计,本程序的输入使用了C语言编程,FIR滤波器是高通的矩形窗滤波器!
kuaijintuiyinyueshizhong_VHDL
- 本程序为模拟可校时的时钟程序;clk--时钟信号,rst--清零信号,set_en--校时 使能信号,faster--快进信号,slower--快退信号,hour--小时校时,min--分钟校 时,(hh,hl,ml,mh,sh,sl)--时,分,秒显示信号。 校时的时候,秒清零。
hh
- s3c4510的原理及测试基本程序,可大大加快开发过程
定时器程序
- 定时器程序 采用89c2051 SL存放秒的个位数 SH存放秒的十位数 ML存放分的个位数 MH存放分的十位数 HL存放时的个位数 HH存放时的十位数-timer procedures used 89c2051 SL storage seconds digit SH 10 seconds stored median ML kept the 000-MH median of 10 hours storage median HL stored at the single-digit HH plac
HH-bf531-circuit-R2.rar
- 这是流行的Blackfin系列中入门级BF531DSP的最小系统PCB原理图,为protel格式,是开发固件代码必备的图纸。,This is a popular Blackfin series BF531DSP the minimum entry-level system PCB schematic for Protel format, is to develop the firmware code required drawings.
hh.rar
- 串行输入并行输出 用vhdl语言描述的 有源代码主打色,Serial input parallel output using vhdl language to describe the main color of the source code
hh-6410
- 华恒6410开发板原理图,献给有需要的朋友,-华恒6410 development board schematics, there is a need to dedicate a friend, huh, huh
clock.c
- 数字钟程序*** * 六位数码管 显示HH.MM.SS(时分秒),MM.DD-W(月日-星期),闹钟定时时间 **************** //****** 按键S5依次选择调整时间-显示月日星期-调整月日星期-显示闹钟定时时间-调整闹钟定时***** //****** 按键S2依次选中时分秒(月日星期)数码管,S3按键依次加1,S4按键依次减1 ****************************** //****** 整点报时,闹钟功能-clock
hh
- 关于嵌入式arm开发的几个头文件描述,需要多用心阅读。-Embedded arm on the development of several header files to describe the need to more carefully read.
hh
- 温度传感器DS18B20操作源程序,包括对传感器的启动,写命令,读、写数据等。-Temperature sensor DS18B20 source operation, including start-up sensor, write orders, reading and writing data.
DClock
- 在单片机上实现长时间精确计时。用软件实现调节时钟计时,以保证长时间计时的准确性。该程序是一个显示在一个双行LCD显示屏上的数字时钟,显示格式为DD HH:MM:SS,其长时间准确计时可以为控制系统准确控制提供保障。类似的计算调整方法可以应用到任何独立计时的单片机系统中。-Digital clock on LCD with high precision via adjusting time autotically.
HH-mGpsCmd
- WINCE COM口工具,可测试COM口与及速率-WINCE COM port tool to test the COM port and rate ~ ~ ~ with
pic-servo-controler-hh
- pic servo controler -pic servo controler hh