资源列表
12864液晶驱动
- 12864液晶驱动,四线串口,含字库驱动,可以直接编译使用。(12864 LCD driver, four wire serial port, including font drive, you can directly compile the use of.)
proteus中51单片机控制交通灯的仿真及论文
- proteus中51单片机控制交通灯的仿真及论文,包括proteus仿真和keil代码,以及全部报告(Proteus 51 singlechip traffic lights control simulation and papers, including proteus simulation and keil code, and all reports)
外部中断实验
- 通过开发板上载有的3个按钮(KEY_UP、KEY0、KEY1),来控制板上的2,LED(DS0和DS1),其中KEY0控制DS0,按一次亮,再按一次,就灭。KEY1控制DS1,效果同KEY0。KEY_UP则同时控制 DS0和DS1,按一次,他们的状态就翻转一次。(Some 3 buttons are uploaded through the development board (KEY_UP, KEY0) (KEY1) to control the 2 LED (DS0 and DS1) on
(1527解码)中断法
- ev1527 无线解码,stc单片机解码程序,软件实现(EV1527 wireless decoding)
跑马灯
- 用51单片机实现对使用LPD6803芯片的LED灯带进行控制,实现跑马灯。(With 51 MCU control with the LED lamp using LPD6803 chip, to achieve marquee.)
心率传感器
- 在编译器Keil中利用C语言编写的检测心率的程序(In the compiler Keil, use C language to write the test heart rate program)
上位机串口通讯
- 自己写的比较完整的上位机串口助手,可以跟下位机建立通讯,并接发数据(Write your own complete PC serial assistant, can establish communication with the lower machine, and sending and receiving data)
5Kg电子秤程序(LCD1602显示)推荐使用
- 利用hx711设计的电子秤程序,采用STC89c52控制,支持1602显示数据(Electronic scale program designed by hx711)
i2s_tx
- i2s发送模块,双声道发送数据,适用于i2s左对齐模式(I2S send module, double channel send data, apply to I2S left aligned mode)
pic16f877超强万年历
- 实现了万年历的功能,可以显示时间,修改时间,设置闹钟 温度显示,等功能。
pic16f877时钟
- 实现了时钟的功能,可以显示时间,修改时间,设置闹钟 温度显示,等功能。
netw5500
- w5500封装了TCP/IP 协议,连接stm32spi串口,进行网络通讯,支持断网重连,连接速短快,程序简单。(W5500 encapsulates the TCP/IP protocol, connect stm32spi serial port, network communication, support broken network reconnection, fast connection speed, simple procedure.)