资源列表
CRC8.rar
- 通讯中对报文进行CRC8校验的程序源代码，多项式为X^8 + X^2 + X^1 + 1 。,Communication packets for CRC8 check on the program source code, the polynomial is X ^ 8+ X ^ 2+ X ^ 1+ 1.
022
- 单片机来做的PWM来无级调光程序 单片机来做的PWM来无级调光程序通过光耦可控硅来控制可控硅的导通角，从而实现白炽灯亮度的变化。 -Microcontroller PWM to do the procedure without dimming PWM microcontroller to do the procedure without dimming control by SCR optocoupler triac conduction angle, in order to achiev
485
- 自制的云台控制器的接收部分，指令经过485总线接收后，解释自己定义的协议，控制交流电机旋转-PTZ Controller made the reception of the 485 bus after receiving instruction, the definition of an agreement to interpret its own, control AC motor rotation
key
- c语言编写51单片机，4*5键盘驱动，已测试-4×5 keyboard driver
fengmingqi
- 同时用两个定时器控制蜂鸣器发声， 定时器0控制频率，定时器1控制同个 频率持续的时间，间隔2s依次输出 1，10，50,100，200,400,800, 1k（hz）的方波? 设晶振频率为12MHz。-At the same time the buzzer sound with two timers, Timer 0 control the frequency of Timer 1 control with a frequency, duration, interval 2s
huarenyidianzichengxu
- 利用8051单片机和12864液晶画直角坐标系-Use 8051 and 12864 LCD picture Cartesian coordinates
LED-TEST
- to glow led in led matrix
dzz
- 以单片机为核心器件，以软件为驱动，来控制数码管。-A microcontroller as the core component of software-driven, to control the LED.
NixieTube
- 多位数码管驱动代码，代码精简，只有30行左右，改动函数参数即可实现1到5位数码管选择显示以及小数点显示位置。-Many LED driver code, code simplification, only 30 lines or so, change the function parameters can be realized 1-5 LED display and select the decimal point display position.
yu-ying
- 这是基于AVR单片机的语音模块源代码，程序调试已成功。-This is based on the AVR voice module source code, debugging has been successful.
12
- 这是单片机控制红绿灯的程序,改程序可以进行拓展和修改，完成很多功能-this is the program of red&green light of mcu
led
- 用51单片机点亮一个led灯，调试可用,keil2调试-MCU with 51 lights led lights, debugging can be used