搜索资源列表
zy_pwm_adc
- 28035,四个按键控制PWM波输出，实现暂停或驱动PWM以及更改ADC采样周期。其中，上键使PWM波周期增加一倍，下键，使PWM波周期减少一半，左键，停止输出PWM波，右键，启动输出PWM波。驱动PWM波的产生，再通过PWM波触发ADC采样，每产生两个PWM，则触发一次ADC采样。最后，驱动ADC采样，将输入的模拟信号经过六次采样转换成数字信号。-Four buttons control the PWM wave output, PWM drive to achieve, and to sus
DSPlicheng
- 常用的一些数字信号处理的源代码， 数据采样等代码-Some commonly used digital signal processing of the source code, data, code samples, etc.
DM642EVM_VideoJPEG2
- DM642EVM JPEG2 编码解码例程，基于DSP_BIOS-JPEG2 Codec Samples based on DM642EVM
CIC6_fir_comp_mlab
- CIC补偿滤波器设计，CIC滤波器采用5阶6倍抽取设计。-CIC compensation filter design, CIC filter 5 samples 6 times the design stage.
CIC8_fir_comp_mlab
- CIC抽取补偿滤波器设计，CIC滤波器采用5阶8倍抽取。-CIC compensation filter design samples, CIC filter order of 8 times 5 samples.
CIC4_fir_comp_mlab
- CIC抽取补偿滤波器设计，CIC滤波器采用5阶4倍抽取。-CIC compensation filter design samples, CIC filter order 4 times using 5 samples.
VP_Capture
- TMS320DM642视频采集例程-TMS320DM642 VIDEO CAPTURE SAMPLES
signal_generator
- This a signal generator for dsp 6416dsk.... In the following we define a signal which contains 30 samples. -This is a signal generator for dsp 6416dsk.... In the following we define a signal which contains 30 samples.
LabVIEW.Digital.Signal.Processing.McGraw.Hill.Pro
- Practical DSP in samples in LabView environment.
Adc_T1_correct
- AD采样频率为10K，序列发生器SEQ1和SEQ2级联成一个16通道的序列发生器， * 采样模式采用顺序采样。利用通用定时器T1的周期中断来触发AD转换。 ADCINA0和ADCINB0为参考电平，对ADCINA0,ADCINA1，ADCINB0，ADCINB1连续10次采样，然后分别排序，滤波，取均值，用A0，B0的值计算增益和偏移量，用来校正A1，B1-AD sampling frequency of 10K, the sequence generator SEQ1 and SE
TMS570_ADC
- TMS570 ADC模块采样 示例程序 基于ccs v4环境-TMS570 ADC module samples the sample application environment based on ccs v4
start
- 用labview实现三路同时采样并判断最大值最小值以及幅值-Three simultaneous samples and determine the minimum and maximum amplitude
F2812_ADsample
- F2812 AD校正算法，提高转换精度。（CCS3.3开发环境）。 AD采样频率为10K，利用通用定时器T1的周期中断事件来启动AD转换。ADCINA0和ADCINB0为参考电平，实际的电压值分别为0.420和1.653。对ADCINA0、ADCINA1、ADCINB0、ADCINB1四个通道进行连续10次的采样，然后对各个通道的10个采样值进行排序，滤波，最后取平均值。然后由ADCINA0和ADCINB0通道的值计算求得CalGain和CalOffset，最后由这两个量来校正ADCINA1和A
01
- 东南大学DSP计算机作业报告 估计随机信号样本自相关序列-Southeast University, DSP computer operating report estimated autocorrelation sequence of random signal samples
DSP_Lab_070
- For a file(.wave) • Find the sampling frequency and the number of bits per sample. • Re-quantize the samples using the following methods: o Linear Quantization o A-Law Companding with A=87.6 o μ-Law Companding with μ=255 •
PID
- DSP2812PID算法，制作数控电源，用ADC采样给DSP,DSP执行算法控制电源输出稳定的电压。并利用DSP保护过压过流保护-DSP2812PID algorithm, the production of digitally controlled power, the ADC samples to the DSP, the DSP implementation of the algorithm to control the power supply output voltage. And D
MSP430common-samples
- msp430常用示例代码-of msp430 commonly used in sample code
232--
- 基于rs232来实现串口的通信的若干源码例程，主要包含计算机和单片机之间实现单工和全双工的例程，以及其它的计算机设置串口来实现串口通信。-Based rs232 serial communication to achieve a number of code samples consists mainly between the computer and microcontroller routines for simplex and duplex, and other computer set
DSPfir
- 这是一个综合性的仿真程序。包括：用matlab生成一个FIR滤波器，得到滤波器系数及阶数；再用C语言产生一个混合频率的数字信号，之后将生成的数据样点送入到DSP主程序进行数字滤波，DSP主程序算法用的是循环缓冲区算法，这一部分在CCS上实现。-This is a comprehensive simulation program. Comprising: generating a matlab FIR filter, to obtain the filter coefficients and or
FIR
- 1、系统仅处于训练状态。训练序列为2cos(2π×f1×n/fs)， 干扰为sin(2π×f2×n/fs)；序列长度为100个样点。 其中n=0…99，f1=1kHz，f2=2kHz，fs=8kHz。 2、采用LMS算法，均衡器输入为训练序列加上干扰，均衡器阶数为21阶，步长因子β=0.01。 3、在Matlab中编写浮点LMS算法，绘制均衡器的输出波形，并与训练序列进行对比。 -1, the system only in the training status. The t