资源列表
counter10
- 该程序实现的是10进制的计数器，具有置位复位的功能。-the program is the band of 10 counters, with the home-reset function.
sub_full_n
- 该程序实现的N位全减器，首先实现一位的减法器，之后实现N位全减器。-Program of the N-bit-wide reduction, the first realization of a subtraction for, after all N-reduction devices.
add_full_n
- 该程序实现的是n位全加器，首先用与非门实现一位全家器，最后实现n位的全加器。-the program is to achieve the n-bit full adder, first using the door with non-realization of a family - and finally realize the full n-bit adder.
burn flash
- 基于TI DSP TMS320C67XX实现的嵌入式系统FLASH引导的实现。程序控制一片FLASH 芯片，将程序固化到FLASH中，完成DSP芯片的程序上电加载。-TMS320C67XX realization of embedded systems FLASH guide realized. FLASH programmed a chip that will solidify the program FLASH, complete DSP chips -- loading procedure
EC51EC52 AT Commands Manual
- Sony_Ericsson GM47 /gr47 AT指令中文手册,-Sony_Ericsson GM47 / Chinese gr47 AT command manuals,
ucosii_sdt_arm
- uC/OS 使用SDT 开发工具包,可以参考一下-uC / OS use SDT Development Kit, a reference
ucosii_gcc_arm
- uC/OS 使用gcc进行开发的例子,可以参考一下-uC / OS developed using gcc example, a reference
LPC_ARM_ISP_V2.2.2
- This document can be considered as a supplement to the already existing Application note AN10302 “Using the Philips LPC2000 Flash Utility”, which is provided in the same zip file. The Application note covers the following topics:-This document ca
lpc2148_usbmem
- USBarmLP2148 This is a USB Memory Device demonstration for the Keil MCB2140 Board with Philips LPC2148. -USBarmLP2148 This is a USB Memory Device demonstration for the Keil MCB2140 Board with Philips LPC2148.
1vm51
- c51 单片机模拟器C++文件格式元代纳一边以 -C file format side is satisfied with the Yuan Dynasty
ucos2 显示驱动
- 并用编程实现两种LCD 驱动方式的基本原 理和方法；1．用总线方式直接驱动带有驱动模块的LCD。 2．用ARM 内置的LCD 控制器来驱动LCD。-programming using two LCD driver means the basic principles and methods; 1. With direct bus driver with the LCD driver modules. 2. ARM with a built-in LCD controller to dri
ucos2 can总线通讯
- 编程实现MCP2510 的CAN 总线通讯；两个UP-NetARM3000 通过CAN 总线相连接。ARM 监视串行口，将接收到的字符发送 给另一个开发板并通过串口显示（计算机与开发板是通过超级终端通讯的）。即按PC 键盘通 过超级终端发送数据，开发板将接收到的数据通过CAN 总线转发，再另一个PC 的超级终 端上显示数据-Programming MCP2510 CAN bus communication; Two UP-NetARM3000 CAN bus link. ARM su