资源列表
GF-(q)-multiplier-design
- 伽罗华域GF（q）乘法器设计,FPGA实现-Galois field GF (q) multiplier design, FPGA realization
1111-Sequence-Detection
- 1111序列检测的设计VHDL代码，用状态机实现111序列检测的设计，如果检测到正确的序列，则led灯亮起，否则熄灭-1111 Sequence Detection design VHDL code, using the state machine to achieve 111 Sequence Detection design, if it detects the correct sequence, led lights, otherwise extinguished
ALINX9226_DB4CE15
- 这是AD9226的驱动程序，是12位的AD转换速率可以达到65M，FPGA用的是Altera的芯片相信你可以从中找到你想要的。-This is the AD9226 driver, 12-bit AD conversion rate can reach 65M, FPGA using Altera' s chips believe you can find what you want.
iq_balance
- 调整iq幅度不平衡的模块，可以解决载漏和边带问题。-Iq amplitude imbalance adjustment module can be resolved carrier and sideband leakage problems.
PCI9054
- PCI9054控制器+乒乓SRAM读写控制器，是一份很好的初期学习程序，很简单 易懂-PCI9054 controller+ ping-pong SRAM write controller, is a very good early learning program, it is easy to understand
Lab_02
- Verilog 3-to-8 Decoder on Spartan3E. Use 3 switches (SW[2:0]) as inputs. Keep SW[2] as MSB. Use 8 LEDs (LD[7:0]) as decoded outputs. i.e. if all input switches are turned off, LD0 should light up.
ds
- Verilog语言，实现移相,输入方波TA，输出移相后T-Phase shifted square wave TA, the phase-shifted output TAA
SOUND_PLAY6
- WM8731芯片的音效处理verilog代码， WM8731芯片是音频ADC\DAC芯片-WM8731 audio processing chip verilog code, WM8731 chip audio ADC \ DAC chip
Quartus-II-13.1-and-Verilog
- Quartus II 13.1的安装破解及第一个Verilog 程序的实现。-Quartus II 13.1 installation and the first to achieve break Verilog program.
HC-SR04
- HC-SR04超声波测距Verilog驱动程序，包含了驱动代码和测试程序，其中驱动程序输出的是回响高电平持续的时间长度，单位us，测量精度高达0.17mm，程序改进过很多次，本次的程序应该没什么问题了。-HC-SR04 Ultrasonic Ranging Verilog drivers, including the driver code and test procedures, which the driver sustained high output is echoed the leng
video_stream_scaler_latest.tar
- 图像放大程序，自带测试程序及说明，欢迎使用-Image amplification procedures, test procedures and comes with instructions, welcome
altfp_matrix_mult
- 浮点数 矩阵乘法模块 verilog语言编写 可直接调用-Floating-point matrix multiplication module can directly call verilog language