资源列表
Mars_EP1C6F_Fundermental_demo(Verilog)
- FPGA开发板配套Verilog HDL代码。芯片为Mars EP1C6F。是基础实验的源码。包括加法器、减法器、乘法器、多路选择器等。-FPGA development board supporting Verilog HDL code. Chips for the Mars EP1C6F. Are the basic source experiment. Including the adder, subtraction, and multiplier, such as MUX.
fpga.fifo
- 异步FIFO是用来适配不同时钟域之间的相位差和频率飘移的重要模块。本文设计的异步FIFO采用了格雷（GRAY）变换技术和双端口RAM实现了不同时钟域之间的数据无损传输。该结构利用了GRAY变换的特点，使得整个系统可靠性高和抗干扰能力强，系统可以工作在读写时钟频率漂移达到正负300PPM的恶劣环境。并且由于采用了模块化结构，使得系统具有良好的可扩充性。-Asynchronous FIFO is an important module which always used to absorb the
Pico_Blaze_sources_VHDL
- Some useful PicoBlaze sources.
vrt
- Variable Reduction Testbench通过对变量进行相关性分析来实现减少变量的目的。-Variable Reduction Testbench is a MATLAB module that allows the application of several methods for variable reduction based on correlation analysis
test1
- vhdl 基于ADC0809 A/D转换控制器的设计实验-vhdl ADC0809
dds
- dds算法的fpga实现 altera 根据不同设置，输出不同频率的信号源-dds algorithm to achieve fpga set according to different altera, the output of the signal source at different frequencies
Simulate
- FPGA控制AD逐点采集信号，并将AD转换后的数据串行发送出去。-FPGA to control the signal sampling point by point AD, AD conversion and serial data sent.
dct2
- 这个是一个基于FPGA的数字图像的整数DCT变换程序，程序高性能地实现了2维DCT变换。-This is an FPGA-based digital image of the integer DCT transform process and procedures to achieve high-performance 2-D DCT transform.
environment
- VHDL开发环境，四人抢答器，实现了四个人能同时抢答的功能。-VHDL development environment Answer four, and the realization of the four functions at the same time Answer.
Time
- 24小时时钟设计程序，含有时，分，秒的电路设计，基于VHDL语言，用Quartus 2程序实现。-24-hour clock design process, with hour, minute, second circuit design, based on the VHDL language, using Quartus 2 program.
TDMA
- 用VHDL语言实现TDMA编码,简单，明了。看标注就可以看懂-use vhdl langhanTDMA
cf_fft_1024_8
- 用verilog编写的1024点的fft快速傅立叶变换-Verilog prepared using 1024 point fft Fast Fourier Transform