资源列表
MAKEAMIF
- 用于生成xilinx开发环境中存储器ip core的mif数据文件的程序代码。(this program is used to generate mif file used by xilinx memory ip core.)
MAKEXCOE
- 用于生成xilinx开发环境中存储器ip core的coe数据文件的程序代码。(this program is used to generate coe file used by xilinx memory ip core.)
crc8_8_serial
- 自己编写的高效8位输入串行CRC-8 ATM程序(an effective program for 8bit serial input CRC-8 ATM calculate.)
bus
- 公交车系统基于FPGA芯片的基础上，增加了数码管显示模块、语音自动报站模块、红外通信模块。站牌系统采用以FPGA为核心的主控芯片，增加液晶显示模块、红外通信模块、RS232总线模块、指示灯显示模块等。(The bus system is based on FPGA chip. It adds digital tube display module, voice automatic reporting module and infrared communication module. The bu
heartbeat
- 整个程序由心率传感器模块，体温传感器模块，3D计步器模块，FPGA开发板，A/D转换器，LCD显示屏等组成。(The entire program module by heart rate sensor, temperature sensor module, 3D pedometer module, FPGA development board, A/D converter, LCD display etc..)
dianziqin
- 基于FPGA的电子琴动态录音与回放系统在FPGA的基础上设计系统的核心功能模块，再配合相应外围电路，在实现了电子琴基本功能的同时，还增加了演奏音乐的存储功能。(The core function module of FPGA electronic organ dynamic recording and playback system based on FPGA based, together with the corresponding peripheral circuit, in the re
irrigation system
- 基于FPGA和ARM，通过DHT11测量土壤温湿度等传感器，最终达到智能灌溉，并且能在PC机上进行监测，可通过PC来控制灌溉(Based on FPGA and ARM, soil temperature and humidity sensors were measured by DHT11, and finally intelligent irrigation was realized, and it could be monitored on the PC machine, and irri
shumaguan
- 7断数码管动态显示数字，初学者适用，芯片是MAX II系列的芯片，比较老旧了。(Digital tube display number)
state_machine
- 同样是简单的MAX II编程，状态机顾名思义，0到8的循环显示，用到了数码管。(The same is a simple MAX II programming, the state machine as its name suggests, 0 to 8 of the cycle display, using the digital tube.)
Carry-Skip Adder
- 经典的进位跳跃、进位选择、并行前缀加法器，16位，基于verilog HDL语言(16-bit carry-skip adder)
FuncTest ver1.0
- 常用FPGA，EP4CE10，经典例程，开发板亲测可用，可用于自学编程(Commonly used FPGA, EP4CE10, classic routines, development board pro test available, can be used for self programming)
LEDTest2
- This is a running 10 bit led on VHDL code including switch to shift from increasing or decreasing