资源列表
A4_Nano_Led2
- 实现led一秒的闪烁。一个很好用的程序，也可以改成呼吸灯(Realizing led one second flickers)
07_uart_test
- 黑金FPGA开发板实现串口Uart通信的verilog代码(Serial Uart communication)
CPLD文件
- USB_BLASTER的CPLD文件，已编译好，直接烧录即可(USB Blaster for the Altera Corporation)
13_smg_interface_demo
- 计时器，并使用数码管来显示。计数程序产生一个６位的十进制的计数器，个位的计数为 100ms, 个位计到９进位，所以十位的计数为１s, 百位为 10s, 依次类推(A timer, and a digital tube to display.The counting program produces a 6 bit decimal counter, the number of bits is 100ms, the bit is 9, so the count of the ten bits is
FPGA-Projects-master
- FPGA BASYS3 PROJECTS
97288427Dual-RAM
- 双口RAM的具体应用，适合工程开发的入门者(Application of dual port RAM, suitable for beginners of project development)
77433614C51_RAM
- 基于51单片机的DRAM使用，对于理解DRAM很好(The use of DRAM based on the 51 microcontroller is very good for understanding DRAM.)
STM32迪文串口屏
- 迪文屏串口程序，自己写，可以移植,用于STM32F1xx系列ARM,可以方便移植使用。 (DWIN DGUS programm used to STM32F1xx.)((DWIN DGUS programm used to STM32F1xx.))
mac_cache_table
- 实现IP地址和mac地址存储，以及由已知IP地址查询到对应的mac地址(The storage of IP address and MAC address is realized, and the corresponding MAC address is querying from the known IP address.)
NetFPGA-1G-CML
- 利用netFPGA板卡实现基本的功能：网卡、路由器等(The basic functions of netFPGA card are as follows: NIC, router, etc.)
xst_vlog_bl2cl25
- DDR 原厂IP核开源代码控制器vrilogHDL代码(xilinx ddr control xst)
can_v3_2
- XILINX 的IP核CAN V3.2的VHDL程序(XILINX's IP core: CAN_V3.2-VHDL)